639501
437
Zoom out
Zoom in
Previous page
1/448
Next page
BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
BACKHOE
Mounting Pin and Mounting Backhoe
IMPORTANT
Make sure both hoses are
firmly
connected before starting
the engine.
A WARNING
Do
not
move the
joystick
control
lever
to
the
swing
position.
1.
Start the engine.
2.
Stand beside the rear wheel. Move the boom to fully raising
position and raise the backhoe by operating the stabilizers until
the mount bar
on
the backhoe main frame are slightly higher than
the tractor main frame support hooks.
NOTE
If
the
support
hooks
are
not
parallel
to
the
mount
bars,
adjust
with
the stabilizers.
3.
Move the tractor backward until the support hooks on the tractor
main frame are just beneath the mount bar
on
the backhoe main
frame.
4.
Lower the mount bar onto the support hooks by operating the
stabilizer and boom control levers.
5.
Move the boom slowly to the lowering position, and engage the
guide plates of the main frame to the bosses
of
sub frame. Then
raise the rear wheels slightly by operating the boom to the
lowering direction.
6.
Shut off the engine. Reinstall the mounting pins, and insert the
slide bar of the mounting pins to the hole of the main frame.
IMPORTANT
Be careful
not
to
catch the hydraulic hoses between
backhoe frame and
tractor
while mounting the backhoe.
NOTE
Move the
tractor
Jloader Jbackhoe
to
an
open area and cycle
all backhoe functions. This
will
check
their
operation and
flow
oil
back
through
the system, filtering
it
and refilling
each circuit. Check the hydraulic oil level before putting the
backhoe
into
full
operation. See section "MAINTENANCE"
for
oil type and correct level.
(1) Support Hook (4) Mounting Pin
(2) Mount Bar (5) Slide Bar
(3) Guide Stop
W1014341
9-S13
437


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota BT601 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota BT601 in the language / languages: English as an attachment in your email.

The manual is 20,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info