639539
58
Zoom out
Zoom in
Previous page
1/88
Next page
TIRES, WHEELS AND BALLAST42
BRear Wheels
[B2320DTN, B2320HSDN]
Rear tread width can be adjusted as shown.
To change the tread width
1. Loosen the nut of cotter pin bolt.
2. Remove the snap pin and wheel hub pin.
3. Change the tread to the desired position.
4. Re-set the wheel hub pin, snap pin and cotter pin bolt.
C USA models
A Always attach tires as shown in the drawings.
A If not attached as illustrated, transmission parts may
be damaged.
A When re-fitting or adjusting a wheel, tighten the bolts
to the following torques then recheck after driving the
tractor forward and backward for 5 minutes and
thereafter on a daily basis.
A Insert the bolt from the indented side of the cotter (C)
as shown.
Tire Models Tread
8 - 16
Farm
B2320
HSDN
B2320
DTN
8.3 - 16
Farm
B2320
HSDN
B2320
DTN
(1) Nut
(2) Spring washer
(3) Bolt
(4) Wheel hub pin
(5) Snap pin
(A) 123 to 147 N-m
(12.6 to 15.0 kgf-m,
91 to 108 ft-lbs)
(B) 108 to 125 N-m
(11.0 to 12.8 kgf-m,
80 to 93 ft-lbs)
(1) Nut
(2) Spring washer
(3) Bolt
(C) Cotter
(D) Cotter
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota B2920 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota B2920 in the language / languages: English as an attachment in your email.

The manual is 5,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info