639467
33
Zoom out
Zoom in
Previous page
1/233
Next page
B1700·B21 00·B2400 WSM, 11770
G
GENERAL
B130F073
(1) Adjusting Screw
(2) Tension Bolt
Checking
Fan
Belt Tension
A
CAUTION
To
avoid personal
injury:
Be
sure
to
stop engine before checking
belt
tension.
1.
Stop the engine and remove the key.
2.
Apply moderate thumb pressure
to
belt
between pulleys.
3.
If
tension
is
incorrect, loosen the dynamo mounting bolts (or
alternator
mounting
bolts) and, using a
lever
placed
between the dynamo (or alternator) and the engine block,
pull the dynamo (or alternator)
out
until the deflection
of
the belt falls
within
acceptable limits.
4.
Replace
fan belt
if
it
is
damaged.
A deflection
of
between 7
Fan
belt
tension Factory
spec.
to
9 mm (0.28
to
0,34 in.)
when
the
belt
is
pressed in
the
middle
of
the
span.
Clutch pedal
free
Factory
spec.
20to30
mm
travel 0.8
to
1.2
in.
Stopper
bolt
dista
nce
:
Factory
spec.
8.5 mm
IIA'
0.3 in.
Checking Clutch
Pedal
Free
Travel
A
CAUTION
When checking, park the tractor on
flat
ground, apply the
parking brake, stop the engine and remove the key.
1.
Slightly depress the clutch pedal
(3)
and measure free travel
at
top
of
pedal stroke.
2.
If
the measurement
is
not
within
the
factory specifications,
loosen the lock
nut
(2)
and adjust
the
clutch rod
(1)
length.
3.
After
adjusting it,
be
sure
to
keep the
following
distance
for
clutch pedal stopper
bolt
(4).
4.
After
adjusting them,
try
to
start engine.
If
no start, check
the safety switch setting position.
(1) Clutch
Rod
(2) Lock
Nut
(3) Clutch Pedal
G-19
(4) Clutch Pedal Stopper Bolt
(5) Clutch Housing
33


Need help? Post your question in this forum.

Forumrules
1

Forum

kubota-b2400

Reset search

  • How to unlock kubota b2400 differential without running the tractor Submitted on 24-7-2022 at 22:50

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota B2400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota B2400 in the language / languages: English as an attachment in your email.

The manual is 15,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kubota B2400

Kubota B2400 Installation Guide - English - 233 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info