Manual Kubota B2320 (page 12 of 88) (English)

639537

Zoom out

Zoom in

1/88

SAFE OPERATION4

1. Disengage the PTO, lower all implements to the

ground, place all control levers in their neutral

positions, set the parking brake, stop the engine, and

remove the key.

2. Make sure that the tractor has come to a complete

stop before dismounting.

3. Avoid parking on steep slopes, if possible park on flat

ground, if not, park across a slope, always with

attachment on the ground.

1. Wait until all moving components have completely

stopped before getting off the tractor, connecting,

disconnecting, adjusting, cleaning, or servicing any

PTO driven equipment.

2. Keep the PTO shaft cover in place at all times.

Replace the PTO shaft cap when the shaft is not in

use.

3. Before installing or using PTO driven equipment, read

the manufacturer's manual and review the safety

labels attached to the equipment.

4. When operating stationary PTO driven equipment,

always apply the tractor parking brake and place

chocks behind and in front of the rear wheels. Stay

clear of all rotating parts. Never step over rotating

parts.

1. Use the 3-point hitch only with equipment designed for

3-point hitch usage.

2. When using a 3-point hitch mounted implement, be

sure to install the proper counterbalance weight on the

front of the tractor.

3. When transporting on the road, set the implement

lowering speed knob in the "LOCK" position to hold the

implement in the raised position.

Before servicing the tractor, park it on a firm, flat and level

surface, set the parking brake, lower all implements to the

ground, place the gear shift lever in neutral, stop the

engine and remove the key.

1. Allow the tractor time to cool off before working on or

near the engine, muffler, radiator, etc.

2. Always stop the engine before refueling. Avoid spills

and overfilling.

3. Do not smoke when working around battery or when

refueling. Keep all sparks and flames away from

battery and fuel tank. The battery presents an

explosive hazard, because it gives off hydrogen and

oxygen especially when recharging.

4. Before "jump starting" a dead battery, read and follow

all of the instructions. (See "JUMP STARTING" in

"OPERATING THE ENGINE" section.)

5. Keep first aid kit and fire extinguisher handy at all

times.

6. Do not remove radiator cap while coolant is hot. When

cool, slowly rotate cap to the first stop and allow

sufficient time for excess pressure to escape before

removing the cap completely. If the tractor has a

coolant recovery tank, add coolant or water to the tank,

not the radiator. (See "Checking Coolant Level" in

"DAILY CHECK" in "PERIODIC SERVICE" section.)

3. PARKING THE TRACTOR

4. OPERATING THE PTO

(1) PTO Shaft cover

(2) PTO Shaft cap

(A) "NORMAL POSITION"

(B) "RAISED POSITION"

5. USING 3-POINT HITCH

(1) 3-point hitch lowering speed knob (A) "FAST"

(B) "SLOW"

6. SERVICING THE TRACTOR

my b 2320 is making a loud clicking sound from the drive line. I suspect it is a broken bearing in the transmission. Is this easily repairable
Submitted on 29-4-2023 at 11:54
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kubota B2320 in the language / languages: English as an attachment in your email.

The manual is 5,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kubota B2320 Manual

Product: