639466
17
Zoom out
Zoom in
Previous page
1/233
Next page
6
FRONT
AXLE
B1700·B2100·B2400 WSM,11770
Drag Link
1.
Steer the
front
wheels
to
the left.
2.
Remove
the slotted
nut
and disconnect
the
drag
link
(2) from
the
knuckle arm (1).
II
IMPORTANT
After
tightening the
slotted
nut
to
the
specified
torque,
install the cotter pin
as
shown in the figure
left.
17.7
to
34.3
N'm
Tightening torque
Slotted
nut
1.8
to
3.5
kgf'm
13.0
to
25.3
ft-Ibs
030F129
(1)
Knuckle Arm
(2)
Drag Link
Front Gear
Case
Front Axle Bracket
(Front)
(3)
Tie-rod
(4)
Front Axle Bracket
(Rear)
Front Axle
1.
Place
the jacks under the
front
axle, and hang up the
front
axle frame
by
the hoist
to
support it.
2.
Remove
the
front
wheels.
3. Remove the
front
axle bracket (Front) mounting screws and
front
axle bracket
(Rear)
mounting
screws.
4. Separate the
front
axle from
the
front
axle frame.
5.
Remove
the slotted
nut
and disconnect
the
tie-rod (3) from
the
front
gear
case
(1).
6.
Remove
the
front
axle bracket (2), (4).
(When reassembling)
Apply grease
to
the oil
seal
of
front
axle bracket
(Rear)
(4).
Front axle bracket
124to
147 N'm
mounting screws
12.6to
15.0
k~f.m
91.1
to
108.5 t-Ibs
Front wheel mounting
77.5
to
90.2 N'm
Tightening torque
7.9
to
9.2
kgf'm
nuts
57.1
to
66.5
ft-Ibs
17.7to34.3
N'm
Slotted
nut
1.8
to
3.5
kgf'm
13.0to25.3ft-lbs
(2) Disassembling
Front
Axle
Bevel Gear
Case
and Front Gear
Case
1.
Remove
the bevel gear
case
mounting screws.
2.
Remove
the bevel gear
case
(3) and
front
gear
case
(4)
as
a
unit
from the
front
axle
case
(1).
(When reassembling)
Apply grease
to
the O-ring (2) and take care
not
to
damage
it.
Do
not
interchange
right
and
left
bevel gear
case
assemblies
and
right
and
left
front
gear
case
assemblies.
B177P181
(1)
Front Axle
Case
(2)
O-ring
(3) Bevel Gear
Case
(4)
Front Gear
Case
Bevel gear
case
123.5to
147.0 N'm
Tightening torque
12.6
to
15.0
k~f.m
mounting screw
91.2
to
108.4 t-Ibs
6-56
17


Need help? Post your question in this forum.

Forumrules
1

Forum

kubota-b2100

Reset search

  • My b2100 (1999) brake s work fine, but the handle to lock them doesn't work any longer. Feels like something is disconnected. Anyone have and answer or a schematic? Submitted on 23-11-2021 at 05:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota B2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota B2100 in the language / languages: English as an attachment in your email.

The manual is 15,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kubota B2100

Kubota B2100 Installation Guide - English - 233 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info