584009
58
Zoom out
Zoom in
Previous page
1/100
Next page
To mount the front wheel, lift the wheel into the fork, slightly pull one brake caliper out and
push the tire in between the brake calipers. Insert the brake disks in the brake calipers and
mount the axle passage.
Mount the collar screw [1] and tighten slightly. Tighten the clamp screws [2] on the right
fork leg axle passage (in the direction of travel) tighten to prevent the axle passage from
turning and tighten the collar nut to 60 Nm.
Loosen the clamp screws on the right fork leg axle passage, take the motorcycle off the stand,
actuate the front wheel brake and vigorously compress the fork several times to align the
fork legs.
Now you can tighten the clamp screws on both fork leg axle passages to 15 Nm.
If you do not have a torque wrench to mount the wheel, have the torques corrected by
an authorized KTM workshop as soon as possible. A loose axle passage can cause the
motorcycle's handling performance to become instable.
After mounting the front wheel, keep operating the hand brake until the pressure point
returns.
Always keep the brake disks free from oil and grease, otherwise the braking effect will
be significantly reduced.
MAINTENANCE WORK ON CHASSIS AND ENGINE »
57
B
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KTM 990 Adventure S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KTM 990 Adventure S in the language / languages: English as an attachment in your email.

The manual is 4,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info