583763
29
Zoom out
Zoom in
Previous page
1/42
Next page
MAINTENANCE WORK ON CHASSIS AND ENGINE »
ENGLISH
28
Changing the seat height
The saddle can easily be raised by 25 mm (1 in). This lets you adjust the
height as your child grows.
Figures A and B show the fork and shock absorber positions for a low seat
position. The fork tubes extend approx. 17 mm (0.7 in) (H) above the upper
fork stabilizer. The shock absorber is attached to the upper hole in the frame.
Tighten the clamp screws on the fork stabilizers to 20 Nm (top) and
15 Nm (bottom), the screw on the shock absorber to 45 Nm.
Figures A and B: low seat position
Figures C and D: high seat position
Figures C and D show the fork and shock absorber positions for a high seat
position.Fork tubes are plane with top of upper fork stabilizer. (Screw cap
(Aluminium) protrudes from the top of the upper fork stabilizer)
The shock absorber is attached to the lower hole in the frame. Tighten the
clamp screws on the fork stabilizers to 20 Nm (top) and 15 Nm (bottom), the
screw on the shock absorber to 45 Nm.
THE FORK TUBES MAY NOT BE LOWERED ANY FURTHER THAN AS DESCRIBED
ABOVE, OTHERWISE THE CLAMPING ON THE UPPER FORK STABILIZER WILL NO
LONGER BE ADEQUATE.
Adjusting the throttle cable *
There must always be a 3 to 5 mm (0.1 to 0.2 in) play in the throttle cable.
To check this, move back the protective cover [1] on the throttle grip. You
must be able to lift the outer covering of the cable 3-5 mm from the adjust-
ing screw [2], until resistance is felt.
To adjust, loosen the counter nut [3] and turn the adjusting screw accord-
ingly. Finally tighten counter nut and slide the protective cover back on.
Adjusting the idle speed (Dell’Orto PHVA 14 DS) *
The idle speed can be adjusted with screw [4].
The idle speed is increased by turning clockwise.
The idle speed is reduced by turning counter-clockwise.
Adjusting the idle speed (Dell’Orto PHBG 19 BS) *
The idle speed can be adjusted with screw [5].
The idle speed is increased by turning clockwise.
The idle speed is reduced by turning counter-clockwise.
3-5 mm
C D
3
1
2
4
5
H
BA
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KTM 50 SX Junior at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KTM 50 SX Junior in the language / languages: English as an attachment in your email.

The manual is 5,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info