Manual KTM 300 EXC (page 94 of 153) (English)

583365

Zoom out

Zoom in

1/153

9-11C

TIGHTENING TORQUES - ENGINE

Flange bolts - cylinder-head M 8 35 Nm (25 ft.lb)

Nuts-cylinder base M 10 35 Nm (25 ft.lb)

Flywheel collar nut M 12x1 60 Nm (44 ft.lb)

Nut for primary sprocket (LH thread) M 18x1.5 Loctite 243 150 Nm (110 ft.lb)

Nut for inner clutch hub M 18x1.5 Loctite 243 100 Nm (74 ft.lb)

Crankcase and cover bolts M 6 8 Nm (6 ft.lb)

Swingarm pivot M 14 100 Nm (74 ft.lb)

Flat head bolt release plate kickstarter M 6x16 Loctite 648 19 Nm (14 ft.lb)

Other bolts M 6 10 Nm (7 ft.lb)

M 8 25 Nm (19 ft.lb)

M 10 45 Nm (33 ft.lb)

Piston fitting clearance 0.05 mm (250) 0.06 mm (300) 0.08 mm (380)

Piston ring end gap 0.3–0.4 mm

Connecting rod bearing - radial clearance 0.021–0.032 mm

Transmission shafts end float 0.1 – 0.2 mm

Clutch springs - length Ø 2.5 new = 43 mm, minimum length = 42 mm

TOLERANCES AND FITTING CLEARANCES

GASKET THICKNESSES

Crankcase 0.5 mm

Clutch cover 0.5 mm

Cylinder bottom gasket as required

Available cylinder bottom gaskets 0.2/0.4/ 0.5 /0.75 mm

Cylinder-head gasket O-rings

250 SX 250 MXC, EXC

BASIC CARBURETOR SETTING

Keihin PWK 38 AG PJ

110499

172 (170,175)

48 (45,50)

NOZ E (NOZ F)

III

1,5

–

Keihin PWK 38 AG

130499

180 (178,182)

45 (48)

NOZ G (NOZ H)

III

1,5

–

300 MXC, EXC

Keihin PWK 38 AG

140499

175 (172,178)

45 (48)

NOZ H (NOZ I)

III

1,5

–

380 SX, MXC, EXC

Keihin PWK 38 AG

150499

170 (168,172)

45 (48)

NOZ H (NOZ I)

III

1,5

–

Carburetor

Carburetor setting number

Main jet

Idling jet

Starting jet

Jet needle

Needle position from top

Slide

Air adjustment screw open

Performance restrictor

Power jet jet

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of KTM 300 EXC in the language / languages: English as an attachment in your email.

The manual is 0 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

KTM 300 EXC Manual

Product: