657919
109
Zoom out
Zoom in
Previous page
1/152
Next page
17 TUNING THE ENGINE 107
Info
If there is a big engine speed rise, reduce the idle speed to a normal level
and repeat the above steps.
If the procedure described here does not lead to satisfactory results, the
cause may be a wrongly dimensioned idling jet.
If you can turn the idle air adjusting screw to the end without any change of
engine speed, mount a smaller idling jet.
After changing the jet, start from the beginning with the adjusting steps.
Following extreme air temperature or altitude changes, adjust the idle speed
again.
17.6 Ignition curve plug-in connector
E00374-10
Plug-in connector
of the ignition timing map adjustment is located on the frame
under the fuel tank.
Possible states
Soft The plug-in connector of the ignition timing map adjustment is discon-
nected to achieve better rideability.
Performance The plug-in connector of the ignition timing map adjustment is
joined to achieve higher performance.
17.7 Changing the ignition curve
Change the ignition curve from Performance to Soft.
Disconnect plug-in connector
of the ignition timing map adjustment. (Figure E00374-10 p. 107)
Soft better rideability
Change the ignition curve from Soft to Performance.
Join plug-in connector
of the ignition timing map adjustment. (Figure E00374-10 p. 107)
Performance better performance
17.8 Checking the basic position of the shift lever
Info
When driving, the shift lever must not touch the rider's boot when in the basic position.
When the shift lever keeps touching the boot, the transmission will be subject to an excessive load.
400692-10
Sit on the vehicle in the riding position and determine distance
between the
upper edge of your boot and the shift lever.
Distance between shift lever and upper
edge of boot
10… 20 mm (0.39… 0.79 in)
» If the distance does not meet specifications:
Adjust the basic position of the shift lever. ( p. 107)
17.9 Adjusting the basic position of the shift lever
401950-12
Remove screw
with washers and take off shift lever
.
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KTM 250 EXC - 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KTM 250 EXC - 2017 in the language / languages: English as an attachment in your email.

The manual is 7,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info