584014
48
Zoom out
Zoom in
Previous page
1/56
Next page
ENGLISH
47
WP 5018 PDS-DCC WP 5018 PDS-MCC
1218X756 1218X757
Compression adjuster 17 LS (low speed) 17
2 HS (high speed)
Rebound adjuster 28 28
Spring 71-90/260 66-86/260
Spring preload 6 mm (0.2 in) 7 mm (0.2 in)
STANDARD ADJUSTMENT - SHOCK ABSORBER
WP 4860 MXMA WP 4860 MXMA
1418X725 1418X735
Compression adjuster 20 22
Rebound adjuster 20 20
Spring 4.0 N/mm 3.8 N/mm
Spring preload 5 mm (0.2in) 5 mm (0.2in)
Air chamber length 100 mm (5.1in) 110 mm (4,3in)
Fork oil SAE 5 SAE 5
STANDARD ADJUSTMENT - FORK
Collar screw, front wheel spindle M 24x1,5 40 Nm
Brake caliper, front M 8 Loctite 243 + 25 Nm
Brake disk, front M 6 10.9 Loctite 243 + 15 Nm
Brake disk, rear M 6 Loctite 243 + 15 Nm
Clamping screws, upper fork bridge M 8 20 Nm
Clamping screws, lower fork bridge M 8 15 Nm
Clamping screws, fork stubs M 8 10 Nm
Collar nut, rear wheel spindle M 20x1,5 80 Nm
Hexagon nut, swing arm bolt M 14x1,5 100 Nm
Hexagon collar screw, handlebar clamp M 8 20 Nm
Allan head screw, handlebar support M 10 Loctite 243 + 40 Nm
Shock absorber, top M 12 60 Nm
Shock absorber, bottom M 12 60 Nm
Sprocket screws M 8 Loctite 243 + 35 Nm
Ball joint for push rod M 6 Loctite 243 + 10 Nm
Engine mounting bolt M 10 45 Nm
Engine brace M 8 33 Nm
Screw adjusting ring spring preload shock abs.
M6 8 Nm
Spoke nipple M4,5 /M5 5 Nm
Other screws on chassis M 6 10 Nm
M 8 25 Nm
M 10 45 Nm
Other collar nuts on chassis M 6 15 Nm
M 8 30 Nm
M 10 50 Nm
TIGHTENING TORQUES - CHASSIS
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KTM 200MXC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KTM 200MXC in the language / languages: English as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info