Manual KTM 125MXC (page 38 of 56) (English)

584013

Zoom out

Zoom in

1/56

ENGLISH

Setting the clock

To set the clock, switch the ignition off and select the SPEED/CLK mode.

Press and hold the MODE button for 3 seconds. The blinking digits can be

changed using the + and – buttons. Press the MODE button to move to the

next digit.

If no button is pressed for 20 seconds, the settings will be stored automati-

cally and the display will return to the SPEED/CLK mode.

BUTTON time +

–

BUTTON time –

press the MODE

BUTTON to change to the next digit

press and hold the MODE

BUTTON 3 SECONDS to store the time and return to

the SPEED/CLK mode

Activating/deactivating the display modes

It may not be necessary to display all of the display modes (functions) at the

same time. It is possible to conceal any information not currently required.

By deactivating certain functions, the MODE button will only allow you to

select from the activated modes.

In the SPEED/H mode, press and hold the MODE button for 3 seconds to

access the SETUP menu. The blinking function can be activated by pressing

the + button and deactivated by pressing the – button.

If no button is pressed for 20 seconds, the setting will be stored automati-

cally and the display will return to the SPEED/H mode.

BUTTON activates the blinking display

–

BUTTON deactivates the blinking display

press the MODE BUTTON to change to the next display without changing

any settings

press and hold the MODE

BUTTON 3 SECONDS to store the settings and

change to the SPEED/H mode

Kilometers or miles

The unit (kilometers or miles) can also be changed. The ODO figure will be

retained and converted accordingly. The TRP1, AVS1, STP1, TRP2 and

AVS2 figures will be cleared.

To select the unit, select the SPEED/H mode and hold the MODE button for

3 seconds to access the SETUP menu. Press the MODE button 10 times

until the KMH/MPH function blinks. Press the + button to move to the

options. Press the + button for KMH or the – button for MPH. If no button

is pressed for 20 seconds, the setting will be stored automatically and the

display will return to the SPEED/H mode.

The setting can be stored immediately by holding the MODE button for a

few seconds until the display returns to the SPEED/H mode.

BUTTON to access the menu

to activate the KMH setting

–

BUTTON to activate the MPH setting

press the MODE

BUTTON to change to the next mode

press and hold the MODE

BUTTON 3 SECONDS to store the setting and return

to the SETUP menu

NOTE:

If you retrofit this Tripmaster on another motorcycle, the power can also be

supplied by the 12 V vehicle electric system. You will need an additional

cable harness, spare part no. 583.14.069.210, which you can order from

your KTM dealer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of KTM 125MXC in the language / languages: English as an attachment in your email.

The manual is 2,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

KTM 125MXC Manual

Product: