657917
110
Zoom out
Zoom in
Previous page
1/152
Next page
17 TUNING THE ENGINE 108
401951-10
Clean gear teeth
of the shift lever and shift shaft.
Mount the shift lever on the shift shaft in the required position and engage the
gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
Mount and tighten screw
with the washers.
Guideline
Screw, shift lever
(125 XCW EU)
M6 14 Nm
(10.3 lbf ft)
Loctite
®
243™
Screw, shift lever
(150 XCW US)
M6 14 Nm
(10.3 lbf ft)
Loctite
®
243™
Screw, shift lever (All
250/300 models)
M6 14 Nm
(10.3 lbf ft)
Loctite
®
243™
17.10 Engine characteristic auxiliary spring
B00056-10
The auxiliary spring is located on the right side of the engine below the water pump
cover.
Possible states
Auxiliary spring with green color coding Auxiliary spring for soft performance.
Auxiliary spring with yellow color coding Auxiliary spring for more aggressive per-
formance than with a green spring.
Auxiliary spring with blue color coding Auxiliary spring for more aggressive per-
formance than with a yellow spring.
Auxiliary spring with red color coding Auxiliary spring for more aggressive perfor-
mance than with a blue spring.
Auxiliary spring without color coding Auxiliary spring for progressive performance
(at first more aggressive than with the red spring, then softer than with the red
spring).
The engine characteristic can be influenced by different spring strengths of auxiliary
spring
.
Info
The auxiliary spring mounted in the as-delivered state as well as the additionally
available auxiliary springs can differ depending on model.
17.11 Engine characteristic setting the auxiliary spring
Warning
Danger of burnsSome vehicle components become very hot when the vehicle is operated.
Do not touch any parts such as the exhaust system, radiator, engine, shock absorber, or brake system before the vehicle
parts have cooled down.
Let the vehicle parts cool down before you perform any work on the vehicle.
Preparatory work
Tilt the motorcycle to the left and secure against falling in this position.
Guideline
Angle of title approx. 4
E00372-10
Main work
(All 125/150 models)
Remove screws
.
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KTM 125 XC-W - 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KTM 125 XC-W - 2017 in the language / languages: English as an attachment in your email.

The manual is 7,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info