657922
111
Zoom out
Zoom in
Previous page
1/154
Next page
17 TUNING THE ENGINE 109
17.6 Checking the basic position of the shift lever
400692-10
Sit on the vehicle in the riding position and determine the distance
between
the upper edge of your boot and the shift lever.
Distance between shift lever and upper
edge of boot
10… 20 mm (0.39… 0.79 in)
» If the distance does not meet specifications:
Adjust the basic position of the shift lever. ( p. 109)
17.7 Adjusting the basic position of the shift lever
401950-12
Remove screw
and take off shift lever
.
401951-10
Clean gear teeth
of the shift lever and shift shaft.
Mount the shift lever on the shift shaft in the required position and engage the
gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
Mount and tighten the screw.
Guideline
Screw, shift lever M6 14 Nm
(10.3 lbf ft)
Loctite
®
243™
17.8 Engine characteristic - auxiliary spring (All 250/300 models)
B00056-10
The auxiliary spring is located on the right side of the engine below the water pump
cover.
Possible states
Auxiliary spring with yellow marking Auxiliary spring mounted at the factory with
medium tuning (standard) for good rideability.
Auxiliary spring with green marking Auxiliary spring for softer performance con-
tained in the separate enclosure.
Auxiliary spring with red marking Auxiliary spring for more aggressive perfor-
mance contained in the separate enclosure.
The engine characteristic can be influenced by different spring strengths of the auxil-
iary spring
.
17.9 Engine characteristic - setting the auxiliary spring (All 250/300 models)
Warning
Danger of burnsSome vehicle components become very hot when the vehicle is operated.
Do not touch hot components such as exhaust system, radiator, engine, shock absorber, and the brake system. Allow these
components to cool down before starting work on them.
Preparatory work
Tilt the motorcycle approx. 45º to the left and secure it to prevent it from falling.
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KTM 125 EXC - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KTM 125 EXC - 2016 in the language / languages: English as an attachment in your email.

The manual is 7,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info