657922
102
Zoom out
Zoom in
Previous page
1/154
Next page
15 ELECTRICAL SYSTEM 100
101722-10
Main work
Remove the screw on the rear of the turn signal housing.
Carefully remove turn signal glass
.
Lightly squeeze orange cap
in the area of the holding lugs and take it off.
Press the turn signal bulb carefully into the socket, turn it counterclockwise by
about 30°, and take it out of the socket.
Info
Do not touch the reflector with your fingers, and keep it free from grease.
Press the new turn signal bulb carefully into the socket and turn it clockwise until
it stops.
Turn signal (R10W / socket BA15s) ( p. 125)
Mount the orange cap.
Position the turn signal glass.
Insert the screw and first turn it counterclockwise until it engages in the thread.
Tighten the screw slightly.
Finishing work
Check that the turn signal system is functioning properly.
15.9 Checking the headlight setting
400726-10
Position the vehicle upright on a horizontal surface in front of a light wall and make
a mark at the height of the center of the low beam headlight.
Make another mark a distance
under the first mark.
Guideline
Distance
5 cm (2 in)
Position the vehicle vertically a distance
away from the wall.
Guideline
Distance
5 m (16 ft)
The rider now sits down on the motorcycle.
Switch on the low beam.
Check the headlight setting.
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with driver.
» If the light-dark border does not meet specifications:
Adjust the headlight range. ( p. 100)
15.10 Adjusting the headlight range
Preparatory work
Check the headlight setting. ( p. 100)
602764-10
Main work
Loosen screw
.
Adjust the headlight range by swiveling the headlight.
Guideline
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with driver (instructions on how to apply the mark: Checking the
headlight setting).
Info
The headlight range may need to be corrected if luggage is carried on the
vehicle.
Tighten screw
.
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KTM 125 EXC - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KTM 125 EXC - 2016 in the language / languages: English as an attachment in your email.

The manual is 7,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info