693403
65
Zoom out
Zoom in
Previous page
1/82
Next page
65
Network Camera
User Manual
Settings interface. For detailed information, please refer to Section 6.6.3.
•Record Triggered by Motion & Alarm
If you select Motion & Alarm, the video will be recorded when the motion and
alarm are triggered at the same time.
Besides configuring the recording schedule, you have to configure the settings on
the Motion Detection and Alarm Input Settings interfaces. Please refer to Section
6.6.1 and Section 6.6.3 for detailed information.
•Record Triggered by Motion | Alarm
If you select Motion | Alarm, the video will be recorded when the external alarm is
triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the settings on
the Motion Detection and Alarm Input Settings interfaces. Please refer to Section
6.6.1 and Section 6.6.3 for detailed information.
3)Check the checkbox “Select All” and click “Copy” to copy settings of this day to
the whole week. You can also check any of the checkboxes before the date and click
“Copy”.
4)Click “Ok” to save the settings and exit the Edit Record Schedule interface.
6. Click “Save” to save the settings.
7.3 CONFIGURING SNAPSHOT SETTING
PURPOSE
You can configure the scheduled snapshot and event-triggered snapshot. The captured
picture can be stored in the SD card (if supported) or the netHDD (For detailed
information about netHDD, please refer to Section 7.1 Configuring NAS Settings). You
can also upload the captured pictures to a FTP server.
• Basic Settings
STEPS
1.Enter the Snapshot Settings interface:
Configuration > Advanced Configuration > Storage > Snapshot
2.Check the Enable Timing Snapshot checkbox to enable continuous snapshot.
2.1.Select the quality of the snapshot.
3.Select the quality of the snapshot. Check the Enable Event-triggered Snapshot
checkbox to check event-triggered snapshot.
3.1.Set the time interval between two snapshots.
4.Click “Save” to save the settings.
Uploading to FTP
You can follow below configuration instructions to upload the snapshots to FTP.
Downloaded from www.Manualslib.com manuals search engine
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ksenia Network Camera BULLET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Network Camera BULLET in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info