629288
9
Zoom out
Zoom in
Previous page
1/45
Next page
Ksenia lares Documentation Page 9
How it works communication
There are used 2 communication protocols simultaneously:
SIA for passive receiving packets
Active UDP asking for getting states of system
By Active UDP we can identify and set actual real state system (for detectors, subsystems, outputs,
peripherals)
SIA passive
When state is changed, control unit is sending packet with information and we process it.
Every 10s device sends NULL packets and we can check that communication is OK. When it
doesn’t come, we notify disconnection.
When driver is starting timeout is 40s, because of delayed packets.
For correct functioning it is necessary to have set all SIA codes in SW Basis (for new and
restore). There are not used prefixes “N” and “O” (new and old event), because events in SIA
are separated like “BA” burglar alarm and ”BR burglar restored.
It is necessary to have set corrects ports for SIA, Application ID, Receiver ID and NULL
packets interval
!!! If identification values aren’t correct – it could cause that device will be connected (via UDP
will be set states) and after that connection will be broken after timeout, because incorrect SIA
identifications.
Implemented SIA packets:
Acknowledgement packet
Null packet
Tamper alarm (zone or CU)
Tamper restoral
Low battery
Low battery restoral
Peripheral Tamper
Peripheral ramper restoral
Peripheral disconnected
Peripheral disconnected restoral
Subsystem Disarm
Subsystem Arm
Burglar alarm
Burglar alarm restoral
Burglar alarm bypass
Burglar alarm unbypass
Burglar alarm trouble (masking), restored by BR
Mains failure
Mains Failure restore
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ksenia Lares at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Lares in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ksenia Lares

Ksenia Lares User Manual - English - 40 pages

Ksenia Lares User Manual - English - 74 pages

Ksenia Lares Installation Guide - English - 17 pages

Ksenia Lares User Manual - German - 26 pages

Ksenia Lares Quick start guide - Dutch - 3 pages

Ksenia Lares User Manual - Dutch, French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info