629288
8
Zoom out
Zoom in
Previous page
1/17
Next page
8
lares
installation manual
ADDRESSING THE DEVICES ON THE KS-BUS
This is a fundamental step when starting up our system. Ksenia introduces an innovative concept for addressing
its devices: all of them come from the factory already preset with a serial number composed of 6 numeric digits.
The code distinguishes every single device univocally. The serial number can be read both through the basis
software and the ergo keypad, as follows.
METHOD READING SUBSTITUTION
basis software
In the display page of
the real-time status
In the main display page of the peripheral device in question, under item
’Serial number’
ergo keypad
‘Peripherals’ Menu > Assign, Program
The replacement is not allowed.
This new approach for addressing peripherals has many advantages:
• Protection from substitution (each peripheral being different from any other and then easily distinguishable);
• Impossibility in creating conicts (same peripheral address);
• Reduction of the possibility of making mistakes in large systems.
If the system has only one peripheral per type, it is very simple: it is advisable to leave it unassigned, then from
the keyboard its assignment will be univocal.
The only care to be taken when conguring and programming the devices is the one of correctly associating
the serial number of the device to its actual position in the system, especially when there are more peripherals
of the same type. For example, if you decide that keypad1 with serial number 000012 will be used in the lounge
and keypad2 with serial number 000020 is to be used in the garage, then they will have to be installed physically
in the lounge and in the garage as planned before; otherwise the two devices will operate in reverse order.
In the following table some examples about where and how to nd the serial number are shown.
DEVICE LOCATION OF THE SERIAL NUMBER EXAMPLE
ergo
4
Access the installer menu and move to the last item,
‘Version’
auxi
imago BUS
pontis
volo
divide
radius BUS
opis
Label adhesive attached, worded SN XXXXXX
gemino BUS
On the GSM radio module, it corresponds to the last 6 digits
of IMEI (in this case 272130)
Vers: S.N.:
0.0.199 250875
4 In order to program and use the keyboard correctly, it is necessary to know the USER and INSTALLER codes from the factory that have to
be changed later on: USER: 147258 • INSTALLER: 123456
MONITORING THE POWER SUPPLY
lares monitors both the external power supply voltage and the battery. It periodically checks the efciency
status of the battery, and will issue a warning in the case of problems. Moreover, in case of prolonged absence
of power supply, the system turns the battery off to prevent deep discharges. This is not merely a protective
measure: it is the system itself that disconnects the battery and, before switching itself off, lares performs all of
the necessary checks, stores the switch-off date and time for any subsequent checks and then switches the
system off without causing any faults. In this case the sirens will not sound, thus avoiding undue trouble.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ksenia Lares at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Lares in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ksenia Lares

Ksenia Lares User Manual - English - 40 pages

Ksenia Lares User Manual - English - 45 pages

Ksenia Lares User Manual - English - 74 pages

Ksenia Lares User Manual - German - 26 pages

Ksenia Lares Quick start guide - Dutch - 3 pages

Ksenia Lares User Manual - Dutch, French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info