693399
48
Zoom out
Zoom in
Previous page
1/58
Next page
rev. 0/2018
lares 4.0 PROGRAMMING MANUAL
48
Type: Partition
The subtypes available are:
• Alarm: sends a message when the partition generates an alarm event.
• Arming mode: sends a message when the partition is inserted.
• Tamper: sends a message when the partition generates a tamper alarm.
• Withdrawal: sends a message when the partition is withdrawn.
• Bell: sends a message when the bell is activated.
• Bell end: sends a message when the bell is deactivated.
• Patrol: sends a message when, following withdrawal, the patrol time begins.
• Patrol end: sends a message when the patrol time has ended: the system is switched on again.
• Input time: sends a message when the input time begins upon an inserted partition.</
• Input time end: sends a message when, after activation, the input time ends.
• Output time: sends a message once the output time begins when the system is switched on.
• Output time end: sends a message when, at the time system arming mode, the output time ends; the plant is now
inserted.
• Negligence: sends a message when the negligence time ends (if programmed in the “Partitions”page)
• Arming mode failure: sends a message when the control panel aborts the input (e.g. the area open during arming mode
and the scenario that manages the arming mode has the EN5013 compatible attribute or manual exclusion).
Type: output
The subtypes available are:
• Activation: sends a message when an output is activated (manually by APP or via an event, e.g. a scenario).
• Deactivation: sends a message when an output is deactivated (manually by APP or via an event, e.g. a scenario).
Type: Peripheral
The subtypes available are:
• Tamper (BUS): sends a message when a BUS device generates a tamper alarm (e.g. opening of the ergo keypad).
• Tamper reset (BUS): sends a message when the tamper on a BUS device is restored.
• Tamper (wls): sends a message when a wireless device generates a tamper alarm (e.g. opening of a Poles lid)
• Tamper reset (wls): sends a message when a tamper on a wireless device is restored.
• Disappearance (BUS): sends a message when a BUS device is no longer detected by the control panel (e.g. cable cut or
peripheral fault).
• Disappearance fixed (BUS): sends a message when the device returns and is detected by the control panel (for
example, peripheral operation reset or BUS wiring reset).
• Disappearance (wls): sends a message when the control panel no longer receives regular communication from some
wireless devices.
• Disappearance fixed (wls): sends a message when the control panel again receives regular communication from a
previously lost wireless device.
Type: Keypad
The subtypes available are:
• Button 0: sends a message when the ( 0 ) button is pressed on the keypad.
• Button 1: sends a message when the ( 1 ) button is pressed on the keypad.
• Button 2: sends a message when the ( 2 ) button is pressed on the keypad.
• Button 3: sends a message when the ( 3 ) button is pressed on the keypad.
• Button 4: sends a message when the ( 4 ) button is pressed on the keypad.
• Button 5: sends a message when the ( 5 ) button is pressed on the keypad.
• Button 6: sends a message when the ( 6 ) button is pressed on the keypad.
• Button 7: sends a message when the ( 7 ) button is pressed on the keypad.
• Button 8: sends a message when the ( 8 ) button is pressed on the keypad.
• Button 9: sends a message when the ( 9 ) button is pressed on the keypad.
48


Need help? Post your question in this forum.

Forumrules
1

Forum

ksenia-lares-4.0

Reset search

  • Hi
    We have a message peripherals lost. What does this mean? Submitted on 24-7-2021 at 08:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ksenia Lares 4.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Lares 4.0 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info