693399
10
Zoom out
Zoom in
Previous page
1/58
Next page
rev. 0/2018
lares 4.0 PROGRAMMING MANUAL
10
A LIST OF PROGRAMMING SESSIONS DISPLAYED ON THE WEB SERVER
We will find all of the control panel information in this session (model, partition status, real time etc.) along with the
most recent ten events stored in the register.
It is also possible to view the last firmware and webserver versions and to update them if present:
Update: is signalled with the ( ) icon
Click on the icon and wait for the process to finish in order to upload any updates.
Below you will find some examples of the icons and menus which appear in the web server depending on the events in
progress:
1) The following screen will be displayed when there are
no fault statuses. In this example, the system has been
switched off.
2) This screen will appear when there are fault statuses. In
this example, the system has been switched off.
6) this screen appears when there is tampe inside the
system but the alarm condition has ceased to exist.
Clicking on the drop-down menu in the bottom right hand
corner will list the faults or system discrepancies.
7) List of system tampers.
One or more zones in the example are have a tampering
status and there is a discrepancy with the data connection.
Home
3) Alarm signal screen during zonal or partition progress
8) This screen will appear when the tamper status has
been restored (tamper memory), but the alarm remains in
progress (red bell)
4) This screen will appear when there is a system fault
and/or a tamper and the alarm status remains active
(e.g. active sirens).
Clicking on the drop-down menu in the bottom right hand
corner will list the faults or system discrepancies.
9) This screen will appear when there is a tamper memory.
Clicking on the drop-down menu in the bottom right hand
corner will list the system tamper memories.
10


Need help? Post your question in this forum.

Forumrules
1

Forum

ksenia-lares-4.0

Reset search

  • Hi
    We have a message peripherals lost. What does this mean? Submitted on 24-7-2021 at 08:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ksenia Lares 4.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Lares 4.0 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info