693400
7
Zoom out
Zoom in
Previous page
1/10
Next page
EN
7
SUGGESTION ABOUT THE USE OF THE CAPSENSE TECHNOLOGY
The Keypad you have purchased do not utilize mechnical buttons, but the modern Capsense
Technology. If you already have other devices with capacitive Keypads, you won’t have any issues
in utilizating it and therefore do not need to continue reading this text. If instead it’s your rst time, we
inviteto follow a few small advices in order to obtain rapidly the best performances from this Technology.
Once powered, the Keypad does a self-calibration to adapt its sensitivity to the existing Humidity and
Temperature conditions.
Important note - Please wait 10 to 15 seconds before touching any buttons.
In this stage, it’s important that the keypad is positioned in its actual use conditions, for example if you
are using the desk-mount support, do not live it up-side down. Should this happen, no worries, leave
it with no touch for 10 seconds and it will go in self-calibration again in order to assure a consistent
sensitivity in the course of time.
Attention - Please avoid any contact with wet ngers!
Getting the button’s position, just touch upon with your nger tips, no pressure needed. If you believe
that the sensitivity is too low, do not increase the nger’s pressure, this doesn’t bring any benet. In this
case, it is enough to change the sensitivity setting, available in 3 different levels, by selecting it from the
keypad menù or by programming the setting taking advantage of the basis software.
At last a small test/game - Insert your PIN, surf in the menù with the circular scroll, select a menù (for
example the one which allows to insert a phone number in the phone-book and insert it by digiting on
the keypad). After few minutes only you’ll be surprised about your condence with the
ergo Keypad!
DEFAULT INSTALLER’S PIN: 123456
DEFAULT USER’S PIN: 147258 (active only after the KP has benn assigned to the
lares Control Panel)
KEYPAD FUNCTION DESCRIPTION
KEYPAD
It is conceived for data-entering (data/charachter) during the conguration process, PIN entering
(programmer or user) etc. By touching or exerting a slight pressure on the area corresponding to the
desired number, it allows to enter alphanumeric characters (letters and symbols) in addition to 0-9
numbers , depending on the
operating context (menu). This is possible because the keypad is provided with the tipical mobile phone
mode
technology, which allows to change the entered character depending on the settings (refer to the
following key-characters match chart).
Two ways to move forward the display line are possible while entering a text: using
another key or avoiding touching any key for 3 seconds after the last type.
Key-characters match chart:
KEY FONT:
0 ( ) / % - _ # *
1 “ “ ‘space’ ? ! , . \ ‘ &
A B C a b c 2 $ @
D E F d e f 3 ; <
G H I g h i 4 = >
J K L j k l 5 [ ]
M N O m n o 6 { :
P Q R S p q r s 7
T U V t u v 8 + }
W X Y Z w x y z 9
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ksenia Ergo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Ergo in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info