Manual Krups YY3069 - Espresseria (page 30 of 187) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

700530

Zoom out

Zoom in

1/187

ENGLISH

PROBLEMS CORRECTIVE ACTIONS

The steam does not come

out of the nozzle.

After switching off your appliance and leaving it to cool:

Make sure the tip of the steam nozzle is properly

afxed. Make sure the steam nozzle is not clogged at

the aerator (if necessary clean the steam nozzle aerator

with the needle supplied). Empty the tank and remove

the Claris lter. Fill the tank with mineral water high in

calcium (> 100 mg/litre or .015oz/gallon), it may take as

many as 5 to 10 cycles of steam at 60 seconds each

cycle to achieve a continuous jet of steam.

There is not enough milk

froth.

Using the needle supplied unblock the small air inlet at

the top of the nozzle if required.

Use a cold container and milk that has been opened

recently.

Try changing the type of milk if this does not work (UHT

or pasteurised).

The milk froth is too bubbly.

Check that the two ends of the small stainless steel

tube are tted correctly into the exible part of the

steam nozzle.

The Auto-Cappuccino

accessory does not suck

the milk (accessory sold

separately).

Ensure that the tube immersed in the milk is not

blocked.

Check that the exible tube is not twisted and that it is

correctly tted into the accessory to avoid any air being

sucked in.

After switching off your appliance and leaving it to cool,

unblock the outlet of the Auto-Cappuccino accessory.

After emptying the coffee

grounds collector, the

warning message is still

displayed on the screen.

Correctly replace the coffee grounds collector and

follow the instuctions on the screen. Wait at least 6

seconds before replacing them.

The power has been cut off

during a cycle.

The appliance resets itself automatically when the

power is switched back on and is ready for a new cycle.

There is water or coffee

underneath the appliance.

The drip collector tray has overowed: empty it and

clean the coffee grounds collector. Check that the drip

tray is tted correctly.

Do not remove the water tank before the end of the

cycle.

A message appears.

Unplug the appliance for 20 seconds, remove the Claris

cartridge and if required, put it back into service.

If the fault persists, note the fault number and contact

KRUPS’ Customer Service.

If coffee ows behind the

coffee nozzles.

Pour cold or room-temperature water into the tank.

Reduce the temperature level.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups YY3069 - Espresseria in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups YY3069 - Espresseria Manual

Product: