Manual Krups XP5220 (page 62 of 120) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

565305

Zoom out

Zoom in

1/120

English

n Once the light has stopped blinking, turn the switch to the "steam" position (to remove the remaining

milk) and run the steam for 30 seconds.

n Turn the switch to the “stop” position.

n Clean the cappuccino accessory with a damp cloth.

For thorough cleaning of the cappuccino accessory, see paragraph 8, "Cleaning and Maintenance".

WARNING!

The steam nozzle will be hot!

USING THE KRUPS XS-6000 AUTO-CAPPUCCINO SET TO FROTH MILK (SOLD SEPARATELY)

The auto-cappuccino accessory makes it easier to make a cappuccino or a caffe latte. It is made up of a

special dual-position nozzle, a stainless steel milk container and a pipe.

This accessory may be sold separately.

n Assemble all the different pieces. Choose the caffè latte or cappuccino position on the special nozzle.

n Fill up the milk container and place a cup or a glass underneath the special auto-cappuccino nozzle.

n Turn the switch to the “steam preheating” position. • Once the light has stopped blinking, turn the

switch to the “steam” position.

n Once the froth has been formed, turn the switch to the “stop” position. The appliance will now

automatically cool itself by launching 3 intermittent pumping cycles. Once this is automatic operation

is complete, you can make a coffee.

To prevent the milk from drying on the auto-cappuccino accessory, we strongly recommend.

n pouring clean water in the container and re-assembling the various components

n starting a steam cycle

n clean all of the components with a damp cloth.

n Do not wash your espresso machine accessories in the dishwasher.

CLEANING OF THE APPLIANCE

n Unplug the power supply before cleaning and let the appliance cool down.

n Clean the outside of the appliance from time to time with a damp cloth. After use, the water tank must

be emptied.

n Rinse inside the tank regularly.

n When a thin white layer starts to form in the tank, carry out a descaling operation (see paragraph 9

"DESCALING").

CLEANING OF THE DRIP TRAY

The drip tray must be emptied after each time the appliance is used. Lift up slightly and remove it from the

appliance.

If multiple espressos are prepared one after the other, it should be emptied from time to time (every 7 to

8 espressos approximately) (fig.19 and 20). The presence of water is normal and is not the sign of a leak.

If necessary, clean the drip tray and its grid with water and a little gentle washing-up liquid, rinse and dry.

When reassembling the components, make sure everything is in the right place.

CLEANING OF THE PERCOLATION HEAD AND FILTER HOLDER

n They must be cleaned after each use. Simply wipe a damp cloth over the percolation head (fig. 21)

and clean the filter holder under running water and use a small amount gentle washing-up liquid.

n Do not use alcohol or solvent-based cleaning products.

n For best results, you can activate the "EJECT" button several times during rinsing. We recommend that

you shake the filter holder thoroughly in order to remove all the water.

8. CLEANING AND MAINTENANCE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups XP5220 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups XP5220 Manual

Product: