Manual Krups XP5220 (page 59 of 120) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

565305

Zoom out

Zoom in

1/120

English

Before using your espresso machine, clean all the accessories in soapy water and dry them.

If you are not using the Claris cartridge, please refer to the paragraph here below “RINSING OF YOUR

APPLIANCE”.

A. INSTALLING THE CLARIS CARTRIDGE (to be done every time the cartridge is replaced)

If you are using a Claris filter cartridge, please follow the procedure to fill it with water:

n Screw the Claris filter into the bottom of the water tank.

n Fill the water tank with water and replace it (fig.2 and 3).

n Turn the appliance on by pressing the "On / Off" button (fig.4).

n Turn the switch to the "steam preheating" position. Once the light stops blinking, turn back the switch

to the "off" position.

n Repeat this operation 2 more times.

n To make sure the Claris cartridge is full of water, place a container under the brewing head, turn the

switch to the "coffee" position and make sure some water is running through. If not, repeat the above

procedure.

In this manner you can be sure that water is circulating well through the filter cartridge.

IMPORTANT:

This installation procedure must be carried out every time the cartridge is

replaced.

The Claris cartridge needs to be replaced every 2 to 3 months if it is used daily.

B. RINSING YOUR APPLIANCE (to be done on first use and after each cleaning / descaling

operation)

Then rinse the appliance. To do so:

n Open the lid and remove the water tank using the handle (fig.1).

n Fill it with water (fig. 2).

n Replace the water tank by positioning it firmly, to ensure the water inlet is in place, and close the lid

(fig.3).

n Turn the appliance on by pressing the "On / Off" button (fig.4).

n Insert the filter holder (without ground coffee) in the appliance (fig.7).

n Place a container of sufficient volume under the filter holder.

n Once the appliance has reached the right temperature, the light stops blinking. Turn the switch to the

"coffee" position (fig.8) and let all the water in the tank run through.

n If necessary, stop the operation by turning the switch to the "off" position (fig.9) to empty the container

and then resume the operation.

n Empty the container and unlock the filter holder: press the "OPEN" button on the filter holder and turn

it to the left (fig.10).

In order to release all the aromas of the coffee and ensure your complete satisfaction, this machine pre-

infuses each coffee. The pump works for 3 seconds, stops the following 3 seconds and then the cycle

continues until the end of the preparation.

6. MAKING AN ESPRESSO

5. BEFORE FIRST USE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups XP5220 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups XP5220 Manual

Product: