689893
6
Zoom out
Zoom in
Previous page
1/92
Next page
4
With ground coffee
The type of coffee you choose will determine the strength and taste of your espresso: the
ner your ground coffee, the more intense your espresso will be.
Fill the water tank with tepid water and ret it on the appliance, making sure that it is
correctly in place.
Plug in your machine.
For the best result, we recommend preheating the accessories beforehand (lter holder,
lter and cups) by following the steps above, without adding coffee.
Turn on the appliance by pressing the On/Off button.
The "On" indicator light will switch on.
Add the ground coffee to the 1 cup lter using the measuring spoon (K) (1 spoon = 1
measure = 1 espresso) (22-23) then pack it using the tamper, turning it using a circular
motion (K) (24). Once packed, the coffee measure should not exceed the MAX level (25).
For best quality, pack the coffee effectively.
Clean off any excess coffee from around the lter holder.
Ensure that the selection button is set to the espresso position
(button not depressed)
(26).
Slot the lter holder into place then turn it to the right until it stops (27).
The thumb wheel, set to function O, indicates that preheating is in progress. Once
preheating has nished, the espresso indicator light switches on (28).
Place a cup under the lter holder and turn the thumb wheel to the left, to the espresso
position, and the coffee will start to ow (29-30).
When the cup is lled, turn the thumb wheel to position O to stop the ow (31).
Remove the cup(s).
Unlock the lter holder by turning it to the left (32) and remove it from the appliance. Do
not touch the lter as it will be hot.
To empty out the coffee, invert the lter holder while holding the lter with the ap so that
only the coffee falls away (33).
Wash the lter and lter holder under running water to remove the rest of the coffee (34).
To make 2 espressos, take the 2 cup lter (F.2) and add 2 measures of ground coffee.
To change the lter in the lter holder, ensure that the lter is positioned with the slot
facing the lever of the handle.
IMPORTANT / The coffee ow is stopped manually. Do not move away from the machine
when it is in use.
IMPORTANT! If you want to make a coffee after frothing milk, you shoud turn
the thumb wheel to the espresso position
and then set the selection button
to the espresso position. After few seconds, the coffee indicator will turn off.
Turn the thumb wheel to function O and wait until the coffee indicator lights up.
During this operation, if the coffee and steam indicator lights are switched on at
the same time, repeat the steps above.
STEAM FUNCTION
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups XP3208 Opio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups XP3208 Opio in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info