Manual Krups XP 1530 (page 9 of 15) (English)

507883

Zoom out

Zoom in

1/15

2.Place the glass carafe with lid in position on

the warming plate.

3.Turn « ON » your appliance in drip coffee

mode using the selector knob (S). The

indicator light will illuminate indicating that

the brewing process has begun (9).

4.As long as the blue indicator light is

illuminated the coffee will be kept warm.

Pause and Serve Feature

The Pause and Serve feature automatically

stops the flow of brewed coffee through the

filter cone if the glass carafe is removed from

the warming plate during the brewing cycle.

You have about 20 seconds between the

removal of the carafe and it being reinserted

back onto the warming plate.

The Pause and Serve device closes off the filter

cone so effectively that there is virtually no

coffee dripping onto the warming plate. Once

the carafe is replaced, the brewing process

and the flow of coffee into the carafe will

resume.

CAUTION

If significant amounts of coffee drip onto the

warming plate afer the carafe has been

removed, please check the seal in the filter

holder to ensure it is placed properly. If a

requirement seal is needed, please contact

one of our main service centers or our main

parts center.

If the filter is overfilled with coffee grounds, it

could cause the water that jets into the filter

cone to overflow between the filter and the

sides of the filter cone. Be sure to use the

proper amount of ground coffee.

If this blockage and subsequent dripping does

occur, put the glass carafe immediately back

onto the warming plate, and allow the full

brewing cycle to run its course. Do not swing

out the swivel filter until the brewing process

is completed.

Cleaning the coffeemaker

Always unplug this appliance before

cleaning. Clean the filter basket, carafe, and

lid in a solution of warm water and mild

liquid soap. These parts can also be placed in

the upper level of your dishwasher away

from the heating and drying element for

safe effective cleaning.

Never use scouring agents.

Never immerse the appliance itself in water.

To clean, simply wipe off with a soft, damp

cloth.

Never use a cloth to clean inside of the

water chamber, as this might leave residual

deposits in the chamber. Just rinse with cold

water periodically.

Decalcifying the

coffeemaker

The warranty does not cover faulty or

broken machines that are not properly

descaled.

The coffeemaker must be decalcified regularly.

The frequency depends on the hardness of

your water and how often you use the

coffeemaker.

Recognizable indications that descaling is

necessary are :

- increase noise during boiling,

- longer preparation time.

If usage is frequent, descaling should be

carried out as follows :

- with soft water once a year,

- with medium hard water every quarter year,

- with hard water once a month.

In doubt regarding the water hardness in your

area, you may call your local water

department.

As descaling agent we recommend the use of

reference solution N°F054 from Satisfusion 1

Service at 888-344-0727.

Dissolve a packet of Krups descaling solution

in 1/2 quart water and pour into the water

container. Run this through 2 or 3 times as if

making coffee, but using no ground coffee.

The hot descaling solution must be allowed to

cool down before being poured into the

water container. Finally do the same twice

using clear water.

XP1500/1530 US/F/E.PM6.5 16/03/05, 10:5212

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups XP 1530 in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups XP 1530 Manual

Product: