543715

Krups XN8006 Maestria Manual

23
Zoom out
Zoom in
Previous page
1/106
Next page
Impostare la leva vapore su .
Spegnere la macchina e impostare il pulsante Espresso su 4 e
il pulsante Lungo su 1.
Aprire e chiudere la leva per espellere la capsula.
Svuotare il vassoio raccogligocce e il contenitore per
le capsule usate.
Riempire il serbatoio dell’acqua con 2 soluzioni
decalcificanti Nespresso e aggiungere l’acqua.
Premere il pulsante Lungo per avviare la decalcificazione.
Posizionare un contenitore (min 1500 ml) sotto l’erogatore
di caffè e il beccuccio vapore.
Cominceranno un mix di operazioni tra caffè e vapore. Non
toccare la macchina durante l’operazione. Una luce costante
indicherà il termine della decalcificazione.
Per entrare in modalità decalcificazione premere il
pulsante Espresso mentre si accende la macchina.
Nota: Durata 20 minuti circa. L’avviso decalcificazione lampeggia quando la macchina è pronta per essere decalcificata (vedere la sezione ricerca e risoluzione guasti).
DECALCIFICAZIONE
EN
FR
IT
Réglez le levier vapeur sur .
Mettez la machine hors tension et tournez le bouton ex-
presso sur la position 4 et le bouton lungo sur la position 1.
Ouvrez et fermez le levier pour éjecter la capsule.
Videz le bac d’égouttage et le bac à capsules usagées.
Remplissez le réservoir d’eau avec 2 sachets liquides
de détartrant Nespresso et le reste avec de l’eau.
Appuyez sur le bouton lungo pour commencer
le détartrage.
Placez un récipient (min 1,5 l) en dessous de la sortie café
et du tube vapeur.
Un mélange d’opérations entre le débit de café et le tube
vapeur se produira. Ne touchez pas à la machine pendant
l’opération. Une lumière continue sur le voyant du milieu
indique que le détartrage est terminé.
Pour entrer dans le mode détartrage, pressez le bou-
ton expresso tout en allumant votre machine.
Note: La durée approximative est de 20min. L’alerte détartrage se met à clignoter lorsque la machine est prête à être détartrée (voir section dépannage).
LE MODE DÉTARTRAGE/
DESCALING MODE/
Note: Duration approximately 20 minutes. Descaling alert will flash when machine is ready to be descaled (see troubleshooting section).
7.
Set steam handle to
.
1.
Turn machine off and set espresso button to 4 and
lungo button to 1.
2. Open and close the lever to eject the capsule. 3. Empty drip tray and the used capsule container.
5. Fill water tank with 2 Nespresso descaling liquid
agents and the rest with water.
8. Press lungo button to start descaling.
6. Place a container (min 1.5L) below coffee outlet and
steam pipe.
9. A mix of operations between coffee and steam pipe flow will
occur. Do not touch the machine during this operation. Steady
middle light indicates descaling is complete.
4.
To enter descaling mode press the espresso button
while turning the machine on.
22
23
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups XN8006 Maestria at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups XN8006 Maestria in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 4,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info