Manual Krups VIVO F 880 (page 19 of 36) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

4374

Zoom out

Zoom in

1/36

The percolation head, the filter holder and the

filters must be cleaned after each use :

• First, allow the appliance to cool down, then

wipe the percolation head with a damp

cloth. Each detachable element can be

rinsed under running water.

• Do not clean the filter holder or the cup rest

grid in the dishwasher.

• If the percolation head is very dirty, unscrew

the percolation head using a coin : the valve

spring and sealing gasket will also come off.

• Clean the grid and wipe the percolation

head with a damp cloth.

• Replace the grid and screw it firmly in place.

• Make sure the valve spring and the sealing

gasket are correctly positioned (21).

Important : After making frothy milk, clean

the steam nozzle immediately by allowing the

appliance to produce steam for 1 to 2

seconds. Then wipe the tip with a damp

cloth. If the pipe and the tip have been

completely obstructed, clean these using a

needle.

If necessary, this part of the nozzle can be

unscrewed using the hexagonal key found on

the measuring spoon and by unscrewing it in

an anticlockwise direction. Clean this part

thoroughly (22).

The nozzle must be screwed back on in a

clockwise direction after cleaning.

Use the key carefully when screwing it back

on, and do not over-tighten.

Warning : Do not remove or assemble the

steam nozzle when it is hot.

The cappuccino accessory can be given a

thorough cleaning as follows:

• Remove the two parts, A and C, of the

metal stem, B (23).

• Wash both parts in hot water.

• If the tiny aspiration hole of part A is

blocked, unblock it using a fine needle.

If the appliance is not to be used for a long

period, do not leave the filter holder in the

percolation head, as this will cause

unnecessary wear on the gasket and shorten

its lifetime.

Descaling

• You should descale your espresso maker

more or less frequently, with citric or tartaric

acid.

We do, however, recommend that you use the

Krups descaling accessory, reference 054,

available from all approved Krups service

centres. This accessory also includes, apart

from two descaling doses, a strip tester for

water hardness to assess how often you need

to descale your appliance in normal use.

Descaling depends on the hardness of the

water, but also on the cycle of use. The

frequency of descaling indicated by accesaory

054 is thus given only by way of indication.

• Then use the following method :

• Before descaling, unscrew the percolation

grid from the percolation head.

• Clean the percolation grid and the

percolation head of any tartar and coffee

ground residues.

• Replace the valve spring and the gasket on

the percolation head and screw down firmly.

• Remove the cappuccino accessory from the

steam nozzle.

• Dissolve two dessertspoons of descaling

product or one sachet from accessory 054 in

half a litre of warm water and pour this into

the empty water tank.

• Place one container under the percolation

head and another under the steam nozzle.

• Switch on the appliance and set the pump

switch to « » position.

• Allow about half of the descaling solution to

run through, then reset the pump switch to

position.

• Turn the steam tap to max position.

• When the steam appears, turn the tap back

to O position.

• Leave the remainder of the descaling

solution to work on the interior of the

machine for 10 to 15 minutes.

• Place a container under the percolation

head and reset the pump switch to « »

position.

ART. 880.PM6.5 19/01/04, 16:0119

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups VIVO F 880 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Krups VIVO F 880

Krups VIVO F 880 User Manual - Dutch - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups VIVO F 880 Manual

Product: