565312
9
Zoom out
Zoom in
Previous page
1/134
Next page
Do not fill your filter holder to the top, use the measuring spoon (1 spoonful for 1 cup, 2 spoonfuls for
2 cups). Remove any excess ground coffee from the edge of the filter holder (fig. 9b).
If the appliance is not used for more than 5 days, empty and rinse the water tank.
Before removing the tank to fill or empty it, always remember to switch off the appliance.
Always ensure that the appliance is placed on a flat, stable, heat-resistant surface.
5. FIRST USE
Rinsing before first use
Before using your coffee machine, clean all of the accessories in water and washing up liquid then dry
them.
Fill the tank with cold water and fit it onto the appliance, ensuring that it is fitted correctly (fig. 1c).
Switch on the appliance by pressing the ON/OFF button d2
The temperature light flashes then remains lit. The appliance is ready for use (fig. 2).
Insert the filter holder (without ground coffee) into the appliance: turn it towards the right as far as
possible (fig. 3).
Place a container with a volume of over ½ litre under the filter holder. Turn the switch d1 to the “coffee”
position (fig. 4, 5), then press on the two cup position several times if necessary.
If the water doesn’t run off (pump priming), repeat the process from the beginning.
Let the water run from the tank. To stop the flow of water, turn the selector d1 to the position (fig. 6)
and unplug the appliance.
Remove the tank, empty it and rinse it carefully and fit it back onto the appliance (fig. 1b and 7).
6. PREPARING AN ESPRESSO
IMPORTANT!
If the espresso machine is being used for the first time, the appliance must be
cleaned as described in paragraph 5 “FIRST USE”.
With ground coffee
The type of ground coffee that you use will determine the strength and taste of your
espresso: the finer your coffee is ground, the stronger the espresso.
Before removing the removable tank, place the selector d1 in the position (fig. 6).
Fill the tank with cold water and fit it back onto the appliance (fig. 7).
Switch on the appliance by pressing the ON/OFF button d2
The LED flashes while the machine is warming up, then remains lit. The appliance is then ready for use.
Release the filter holder by pressing the button lightly and turning it towards the left (fig. 8). Using
the measuring spoon, place the ground coffee into the filter holder: one measuring spoon (filled to the
top) per cup for a good espresso (fig. 9a).
Remove the excess ground coffee from the edge of the filter holder (fig. 9b).
Insert the filter holder into the appliance tightening it by turning it towards the right as far as possible
(fig. 11).
Place a cup on the grill of the drip tray under the filter holder (fig. 12).
Turn the selector d1 to the position (coffee) (fig. 4).
After a few moments, the coffee stars to flow.
When the cups are full. Move the selector d1 back to the position (fig. 6).
Remove the cup.
English
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups PERFECTO XP4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups PERFECTO XP4200 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info