565308

Krups ORCHESTRO Manual

12
Zoom out
Zoom in
Previous page
1/15
Next page
22 23
• Start the desclaing programme by pressing
the control for about 3 seconds (32).
The «on/off», «empty collector» and
«descale» indicator lights are lit.
• Empty the tray and the coffee collector and
replace them on the appliance.
The «on/off» and «steam» indicator lights
flash and the «descale» indicator light is lit.
•Place a container with a capacity of at least
300 ml under the steam nozzle.
•Turn the steam/hot water selector to the
position (33).
The descaling solution is pumped at regular
intervals (stops and starts for approx 10 mins)
and ejected via the steam nozzle.
The «descale» indicator light flashes.
Note! Do not interrupt this cycle.
Wait until the «empty
collector» light comes on.
When the steam circuit has been descaled, (after approx 10 mins) the «empty
collector» indicator light comes on.
• Empty the container
•Take out and empty (if necessary) the tray and the coffee collector.
Wait for 10 seconds and replace these parts on the appliance.
The «on/off» and «steam» indicator lights flash and the «descale» indicator
light is constant.
•Turn the steam/hot water selector to the position .
• The descaling continues and the descaling solution is ejected at intervals into
the used ground coffee holder (this takes about 15 mins).
• The «descale» indicator light flashes.
• When the «fill water tank» and «empty collector» indicator lights come on,
remove the drip tray and coffee collector compartment, empty it and replace it
on the appliance for the descaling to continue.You must repeat this operation
until the «fill water tank» indicator light comes on.You can now continue
descaling.
Note! If the tank has been filled with more than 1/2 litre of water, the
«fill water tank» indicator light will not come on. Only the
«empty collector» indicator light is lit.
•Rinse the water tank thoroughly.
• Fill it with fresh water (at least 1 litre, i.e over half full) and replace it on the
appliance.
• Remove the tray, empty it and replace it.
The «on/off» and «steam» indicator lights flash and the «descale» indicator
light is lit.
• Place a container with a capacity of at least 300ml under the steam nozzle.
• Turn the steam/hot water selector to the position .
•Water is pumped at intervals and ejected via the steam nozzle.The «descale»
indicator light flashes (this takes approx 3 mins).
• When the «empty collector» indicator light comes on, empty the container.
Remove and empty the drip tray and the coffee collector. Replace these parts on
the appliance.
The «on/off» and «steam» indicator lights flash and the «descale» indicator
light is lit.
•Turn the steam/hot water selector to the position .
• The descaling continues and water is ejected into the used ground coffee holder.
The «descale» indicator light flashes (this takes about 3 mins).
• When the «empty collector» indicator light comes on, empty the drip tray
and coffee collector and replace them.
The «on/off» and «rinse» indicator lights come on.
• Press the control .
• After rinsing, all the indicator lights go out.
• Remove the tray from the coffee collector. Clean these parts in hot water and
washing-up liquid. Rinse and dry the parts and replace them on the appliance.
Note! If, when the programme starts, there is not enough water in the
tank, you will be warned of this by the «fill water tank» indicator
light coming on.Add water to the tank and the descaling will
continue automatically.
If the tray is not in position, you will be warned of this by the
flashing of the «empty collector» indicator light. Replace the tray
for the descaling programme to continue automatically.
If you activate the steam/hot water selector by mistake, you will be
warned of this by the flashing of the «on/off» and «steam»
indicator lights. Return the selector to the position for the
descaling programme to continue automatically.
If you press the control during descaling or if there is a power
cut, the descaling programme has to be started again right
from the beginning.
Note! Do not interrupt the descaling cycle at any time. Be patient.
KRUPS KRUPS
Indicator LightsIndicator Lights
32
33
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups ORCHESTRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups ORCHESTRO in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info