Manual Krups NOVO PLUS FNC3 (page 18 of 86) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

549029

Zoom out

Zoom in

1/86

Using the various functions of

your espresso machine

1. ESPRESSO FUNCTION

. WITH GROUND COFFEE

For best results, we recommend that you first

pre-heat the accessories (filter holder, filter

and cups) without putting in ground

coffee. To do this :

• Fill the water tank (1) (2) (3) and start the

appliance (5).

• Put the filter holder in place (7) (8), and

place the espresso cups underneath.

As soon as the appliance reaches the correct

temperature the orange indicator light will go

out.

• Turn selector to the setting (10).

• When the cups are full of hot water, reset

the selector to the

O setting.

Once the appliance is hot, the espresso cups

can then be pre-heated on the cup warming

plate.

. Preparing an espresso :

• Fill the water tank (1) (2) (3) and start the

appliance (5).

• Put the filter for one or two cups into the

filter holder (6) .

• Put one or two measures of ground coffee

into the filter with the measuring spoon and

tamp down using the measuring spoon (12)

(13).

• Remove any ground coffee which is lying

around the filter (14).

• Replace the filter holder (15).

• Place one or two espresso cups beneath the

filter holder.

As soon as the appliance reaches the correct

temperature the orange indicator light will go

out.

• Then turn the selector to the setting

(16).

• When the cups are full, reset the selector to

the O setting.

• Remove the filter holder and the filter from

the machine, and take out the coffee

grounds (17).

The filter can be refilled to make more

espressos.

. WITH THE SPECIAL «ESE» FILTER HOLDER

(MODELS FNC2/FNC3)

The E.S.E. system was designed for making

Italian-style “espresso ristreto” (squeezed).

The amount of coffee is 35 ml and the water

should take 20 seconds to run through.

«ESE», which stands for «Easy Serving

Espresso» , is a selected measure of coffee,

ground and pressed between two filter papers

making it ready for use. This system thus

makes it easy for you to prepare your espresso

because you avoid the measurement and

tamping down operations and it also makes it

easier for you to clean the appliance.

We do not intend, or recommend, that

the ESE servings are used for making a

long coffee.

We recommend that you take care, when

handling and storing the ESE servings, that

they do not become deformed.

For best results, we recommend that you pre-

heat the accessories (filter holder, filter and

cups) without any coffee. To do this:

• Fill the water tank (1) (2) (3) and start the

appliance (5).

• Put the empty ESE filter in place (7) (8) (9)

and position the espresso cup underneath.

Once the appliance reaches the correct

temperature, the orange temperature control

light will go out.

• Then turn the selector to the

setting

(10).

• When the cup is full of hot water, reset the

selector to the O setting.

Once the machine has heated up, the

espresso cups can be pre-heated on the cup

warming plate (on top of the machine).

. Preparing an espresso:

• Place the ESE serving in the ESE filter holder

fitted with its own filter (21).

FNC1/2/3.PM6.5 19/01/04, 16:1718

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups NOVO PLUS FNC3 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups NOVO PLUS FNC3 Manual

Product: