649139
20
Zoom out
Zoom in
Previous page
1/166
Next page
EN
FR
20
Restauration des réglages par défaut
Vidange du système
avant une période de non-utilisation ou en protection contre le gel
Les réglages par défaut sont les suivants:
- Boutons Lungo (110ml), Espresso (40ml) et Ristretto (25 ml).
- Mode de mise hors tension automatique après 9 min de
non-utilisation.
- Par défaut, la dureté de l’eau est définie sur «dure», ce qui
correspond à environ 1000 tasses Espresso.
Pour restaurer les réglages par défaut à partir de votre machine:
1. Vérifiez que la machine est éteinte.
2. Appuyez simultanément sur les boutons Espresso et Lungo
pendant au moins 5 secondes.
Tous les boutons et LEDs s'allumeront une fois pour confirmer
le changement. Pour annuler l'appairage de votre machine,
consultez la section «Dépannage».
Min 5 sec
> 6 sec
Toute restauration des réglages
par défaut entraîne l’annulation
de l'appairage, ainsi que la
réinitialisation de la gestion du
stock de capsules et de l’alerte de
détartrage.
Retirez le réservoir
d’eau. Placez un récipient
sous la sortie café.
Notez que la machine reste bloquée pendant 10 minutes après la vidange!
Vérifiez que la machine
est sous tension,
appuyez simultanément
sur les boutons Ristretto
et Lungo pendant au
moins 6secondes.
Les boutons Ristretto et Lungo clignotent pour confirmation.
Refermez ensuite la fenêtre coulissante pour commencer la
procédure. Si la fenêtre coulissante était déjà fermée, le processus
de vidange démarre automatiquement. À la fin de la procédure,
nettoyez le bac d’égouttage et le support de tasse. La machine
passe automatiquement en mode de mise hors tension une fois la
vidange terminée.
Reset to Factory Settings /
Emptying the System
before a period of non-use or for frost protection /
Factory settings are:
- Lungo, Espresso, Ristretto coffee buttons 110ml /
3.7oz, 40ml / 1.35 oz., 25ml / 0.84 oz.
- Automatic OFF mode after 9 minutes.
- The water hardness set by default is hard, which
corresponds to around 1000 Espresso cups.
To do it via your machine:
1. Ensure the machine is turned OFF.
2. Press and hold Espresso & Lungo buttons for at
least 5 seconds.
All the coffee buttons and LEDs will blink once as
confirmation. To unpair your machine, please refer
to the «Troubleshooting section».
If you reset to factory settings,
this will cancel the pairing, reset
the capsules stock management
and the descaling alert.
Remove the water tank.
Place a container under
the coffee outlet.
To note, the machine remains blocked for 10 minutes after emptying!
Ensure the machine
is ON, press and hold
the Ristretto & Lungo
buttons together for at
least 6 seconds.
The Ristretto and Lungo coffee buttons will
flash for confirmation. Then close the slider to
start procedure. If the slider was already closed,
the emptying process starts automatically. When
the procedure is finished, clean the drip tray and
the cup support. Machine turns to OFF mode
automatically when empty.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups Nespresso Prodigio XN410T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups Nespresso Prodigio XN410T in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 8,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info