649130
7
Zoom out
Zoom in
Previous page
1/170
Next page
EN
77
Avoid risk of fatal electric
shock and fire.
In case of an emergency:
immediately remove the plug
from the power socket.
Only plug the appliance into
suitable, easily accessible,
earthed mains connections.
Make sure that the voltage
of the power source is the
same as that specified on the
rating plate. The use of an
incorrect connection voids the
guarantee.
The appliance must only be
connected after installation.
Do not pull the cord over
sharp edges, clamp it or allow
it to hang down.
Keep the cord away from heat
and damp.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons,
in order to avoid all risks.
If the cord is damaged, do
not operate the appliance.
Return the appliance to
the Nespresso Club or to
a Nespresso authorised
representative.
If an extension cord is
required, use only an earthed
cord with a conductor cross-
section of at least 1.5 mm
2
or
matching input power.
To avoid hazardous damage,
never place the appliance on
or beside hot surfaces such
as radiators, stoves, ovens,
gas burners, open flame, or
similar.
Always place it on a horizontal,
stable and even surface. The
surface must be resistant to
heat and fluids, like water,
coffee, descale fluid or similar
liquids.
Disconnect the appliance from
the mains when not in use for
a long period. Disconnect by
pulling out the plug and not
by pulling the cord itself or the
cord may become damaged.
Before cleaning and servicing,
remove the plug from the
mains socket and let the
appliance cool down.
Never touch the cord with wet
hands.
Never immerse the appliance
or part of it in water or other
liquid.
Never put the appliance or
part of it in a dishwasher.
Electricity and water together
is dangerous and can lead to
fatal electrical shocks.
Do not open the appliance.
Hazardous voltage inside!
Do not put anything into any
openings. Doing so may cause
fire or electrical shock!
Avoid possible harm when
operating the appliance.
Never leave the appliance
unattended in case of
manually operated brewing
mode. In case of pre-
programmed or remote
brewing mode, additional
safety precautions must
be undertaken to avoid
any possible harm, such
as: respect the intended
use, make sure the cup of
adequate size is placed on
the cup support, slider is
completed closed, ensure
there is water in the water
tank and keep the appliance
and its cord out of reach of
unassisted children or pets.
Do not use the appliance if it
is damaged or not operating
perfectly. Immediately remove
the plug from the power
socket. Contact the Nespresso
Club or Nespresso authorised
representative for examination,
repair or adjustment.
A damaged appliance can
cause electrical shocks, burns
and fire.
Always completely close the
9555_UM_EXPERT_KRUPS.indb 7 03.06.16 16:18
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups Nespresso Expert XN 6008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups Nespresso Expert XN 6008 in the language / languages: English, German, Dutch, Polish, Spanish as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info