480410
40
Zoom out
Zoom in
Previous page
1/50
Next page
40
Programmazione
personalizzata
Se volete modificare le quantità di caffè pre-
programmate, procedete come di seguito :
Mettete l’apparecchio sotto tensione,
inserite una capsula nel porta-capsule ed
una tazza al di sotto.
Quando la spia luminosa rossa passa da
intermittente a fissa, posizionateVi sulla
funzione « ».
La spia verde di controllo «
» si accende
unitamente alle spie « » e « » (15).
Premete sulla funzione «
» mantenen-
dola fino alla quantità desiderata (16).
Premete sulla funzione «
» per memori-
zzare la quantità (17).
Per modificare la quantità dei cappuccini,
procedete nella stessa maniera, premendo la
funzione « ».
Preparazione di acqua calda
Con questo apparecchio Voi potete anche
preparare dell’acqua calda per il thè, caffè
solubile, ecc.
Riempite il serbatoio e portate il bottone
vapore/acqua calda su «
»
• Mettete l’apparecchio sotto tensione e
quando la spia rossa diventa fissa (non
intermittente) girate il beccuccio del vapore
e mettevi sotto un recipiente. Portate il
comando su «
» e girate il comando
vapore/acqua calda sulla posizione «
»
(18). Se il bottone non è attivato dopo due
minuti l’apparecchio ritorna in fase normale.
Quando la quantità d’acqua raccolta nel
recipiente è sufficiente, girate il bottone
vapore/acqua calda sulla posizione «
».
Togliete il recipiente e girate il beccuccio del
vapore verso il cassetto raccogli-gocce.
Fate molta attenzione a non bruciarVi con
il vapore o l’acqua calda.
Per ottenere il vapore
Il vapore serve a far montare il latte per il
cappuccino, a pre-riscaldare le tazzine o per
riscaldare qualsiasi liquido, il rumore che
potete notare durante tale operazioni è
dovuto alla messa in moto - intermittente,
della pompa dell’acqua.
Attenzione :Prima di ottenere il vapore,
verificate che il porta-capsule posto
nell’apparecchio, sia vuoto per evitare che il
caffè possa seccarsi ostruendo l’orefizio di
uscita del caffè.
Fare montare il latte per il
cappuccino
Per ottenere un buon cappuccino potete far
montare il latte con cui prepararlo, utilizzando
l’accessorio appositamente studiato per tale
scopo, che adatterete al beccuccio del
vapore.(19).
Attenzione :questo accessorio può essere
utilizzato solo per questa funzione.
• Versate circa 100 ml di latte scremato, in un
piccolo ma alto recipiente ( contenuto max
0,5 lt)che possa essere allocato sotto il
beccuccio del vapore.
Il latte deve essere freddo cosí come il
recipiente che non deve essere lavato con
acqua calda, prima del suo utilizzo).
Prima di tutto preparate l’espresso,
riempendo a metà circa, la tazza.
• Girate il bottone vapore/acqua calda sulla
posizione «
» e selezionate la funzione
«
» (20).
La spia di controllo rossa e quella verde,
iniziano ad accendersi in intermittenza.
Quando quella rossa passa ad essere fissa,
l’apparecchio ha raggiunto la giusta
temperatura per l’ottenimento del vapore. Se
il bottone non viene azionato nei primi due
minuti, l’apparecchio ritorna nella normale
fase.
Immergete il beccuccio del vapore nel
recipiente contenente il latte
ART. 897.PM6.5 18/02/04, 10:1140
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups Nespresso 897 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups Nespresso 897 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info