English
26
Au t o - O f f s e t t i n g ( o n l y f o r m o d e l w i t h g l a s s j u g ) :
n
Press PROG (r) 3 times, the number of hours will blink and the 2 red
lights (o) on the control panel will blink.
n
Use the H button (p) to select 30 minutes, 1 or 2 hours, then press on
the PROG button to confirm.
n
Press PROG when done.
n
This function controls how long the heating plate will continue before
automatically turning off. For best results we recommend brewing only
as much coffee as you will consume in 30-60 minutes. Taste is affected
the longer the coffee is allowed to sit on the heating plate.
AROMA FUNCTION
This function is designed specifically for small batches, normally less than
6 cups, where brew cycles become too short to properly extract the coffee
taste from the coffee ground.
n
To activate press the Aroma button (q), then press On.
Note : this function cannot be changed once the brew cycle has started.
The function can also be used for full pots but will cause more of
the bitter flavours to be extracted in that case. Krups recommends
only using Aroma Control for small batches less than 6 cups.
WATER FILTRATION
n
DuoFilter* Water Filtration: active vegetable based double acting anti-
chlorine and anti-scale filter. The anti-chlorine action of the filter brings
out the most delicate flavours of the coffee. The anti-scale action allows
for longer periods between descaling.
Note: there is a rotary indicator on the top of the water filter holder. This
indicates when the DuoFilter* should be changed. Place the index
mark next to the month the filter should be changed, referring to the
chart below.
*according to model
