Manual Krups KM4682 - T8.2 (page 9 of 38) (English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish)

712618

Zoom out

Zoom in

1/38

The descaling of the coffee maker must be between 20 and 60 cycles or once a month depending on the

water hardness.

How to descale your KRUPS coffee maker

Use the KRUPS

descaling solution diluted in 0.5l of water or 250 ml of commercially available white vinegar

in half-litre of water.

Pour the solution into the water tank (without coffee).

Start the cycle (without coffee). After 4 min, manually stop the cycle. Leave it still for an hour. Restart the

coffee to complete the cycle.

To rinse the machine, run 2 cycles with water but no coffee.

Repeat the operation if necessary.

■ The guarantee does not cover appliances which become faulty because the descaling

operations have not been carried out regularly.

ACCESSORIES

For spare and accessories please contact The Customer Relations Department, see contact list

- Glass jug

POSSIBLE BREAKDOWNS AND SOLUTIONS

English

PROBLEM SOLUTION

The coffee does not flow or the ap-

pliance does not turn on.

Make sure that the appliance is properly plugged in a working

outlet and it is in "ON" position.

The water tank is empty.

There was a power outage.

The automatic stop function to switch off the appliance. Turn

the power off and then on again. For more information, see

"Preparation of coffee" section.

Theapplianceseemstoleak.

n Make sure that the water tank was not filled beyond the

maximum limit.

at the lid of the glass jug :

n ensure that the glass jug is positioned correctly: stop the

machine and wait 5 minutes. Unlock the lever, remove the

glass jug, put it back and lock the lever.

n ensure that the joint

(J)

is positioned correctly

at the lid of the water tank:

n Remove it and put it back: the lid of the water tank must be

properly fixed, so that the edge of the lid surrounds the ring of

rubber.

The flow of coffee takes more time.

n Descale the appliance.

n Several minerals can accumulate in the circuit of coffee maker. It

is recommended to descale the machine regularly. It may be

needed to do it more frequently depending on the hardness of

your water. For more information, see the “Descaling” section.

n It is normal that some time elapses between the start of the

coffee cycle and the flow of the first drops in the carafe. This

corresponds to the increase in pressure in the water tank

allowing the flow of water.

NOTE:

Do not disassemble the appliance.

KR-COFFEE-MAKER_T8_8080013567_Miseenpage119/05/1417:53Page11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups KM4682 - T8.2 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups KM4682 - T8.2 Manual

Product: