690508
11
Zoom out
Zoom in
Previous page
1/20
Next page
11
ENGLISH
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
PROBLEMS CAUSE SOLUTIONS
The appliance does
not work.
It is not plugged in. Plug the appliance in using a plug with
the same voltage.
The bottle (B) is not
correctly assembled or
positioned on the motor
unit (A).
Check that the bottle is correctly
assembled; dismantle and assemble
again Fig.1 and Fig.2 and check that it
is far down enough on the motor unit.
Maintain pressure on the blender
bottle assembly (B) during operation
Fig.3.
Excessive vibration. The appliance is not on
a at, stable surface.
Put the appliance on a at stable
surface.
Volume of ingredients is
too high.
Reduce the quantity of ingredients
processed.
Error in assembling the
accessories.
Check that the bottle (B2) is correctly
assembled with the blade unit(B1).
Leak from the bottle Incorrect positioning of
the seal on the blade
unit (B1).
Make sure that the seal is correctly
positioned, the lips of the seal should
be visible and it should not be buckled
Handle the blade units (B1) with
care because the blades are sharp.
To ensure optimal effectiveness of
NutriKeep technology, never remove
the gasket from the blade holder. If
you remove it, you may damage the
gasket and impair the proper operation
of your appliance.
The blade unit (B1)
is insufciently or
incorrectly locked on the
bottle (B2).
Make sure that the blade unit and the
bottle are tted together correctly.
The blade does not
rotate easily.
Pieces of food are too
big or too hard.
Reduce the size or quantity of the
ingredients processed.
Add liquid to the bottle without
exceeding the maximum level.
Is your appliance still not working?
Contact customer service (see contact details in the separate booklet).
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups KB181 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups KB181 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info