Manual Krups GVS241 (page 39 of 92) (All languages)

461312

Zoom out

Zoom in

1/92

English English

English

 Disassemble the lower ring by pushing or pressing on BOTH levers of the handle, and pressing

downwards (Fig. 3).

 Clean all the parts in accordance with the following instructions.

Cleaning before first use

 Before using the ice-cream maker, clean it to eliminate any residues from manufacturing.

 Never immerse the motor unit in water. Just clean it with a moist cloth.

 Clean the cooling bowl, lid, rings and paddle with warm water. On model Ref. GVS2, you can also

clean the spatula and flexible lid in warm water.

 NEVER CLEAN parts with abrasive or harsh products. You could damage them.

 Carefully dry all parts before use.

PREPARING ICE CREAM, ICED YOGHURTS AND SORBETS

 Remove the rings from the cooling bowl. Make certain that the bowl is perfectly dry inside and out

before leaving the empty bowl to cool for at least 24 hours in a freezer at a temperature of –18°C

or colder. The freezing time may be longer in a combination refrigerator/freezer. Make sure the bowl

is upright to ensure an even distribution of the liquid between the walls when it freezes.

 Prepare the ice cream mix (see recipes section). First cool the mixture in the refrigerator for at least

12 hours if it has been heated during preparation.

 As the mix will increase in volume during preparation, do not exceed 1 Kg of mix for sorbets and 1

litre for ice creams (Fig. 8).

 Make certain the appliance is unplugged and start assembling the components. When removing

the bowl from the freezer, take care to protect your hands to prevent freezer burn.

a) Assemble the lower ring (you should hear a clicking noise as it snaps into place). Then fit the

upper ring onto the cooling bowl. Make certain they are correctly secured (Fig. 4).

b) Secure the motor unit to the lid and slot the paddle into the motor unit (Fig. 5). Make certain

the motor unit is securely attached.

c) Place the lid (with the motor unit and the paddle) on the bowl and turn clockwise to lock it

(Fig. 6). Make certain that the 4 locks are properly engaged.

 Connect the ice cream maker and run it immediately to avoid the paddle freezing onto the

extremely cold bowl. The light will come on.

 Always pour the preparation into the ice-cream maker through the filling hole (Fig. 7). If you wish

to add in other ingredients as the mix freezes, pour them in through the hole slowly with the paddle

running.

 Once you have obtained the desired consistency, turn off the appliance and unplug it. It will take

between 20 and 40 minutes to make the preparation according to the recipe, the quantity of ice

cream and initial temperature of the ingredients.

 When the ice cream or sorbet starts to melt at the sides of the bowl or on the surface, it is ready.

So as not to put strain on the motor, the appliance will change the direction of rotation when the

mix becomes too compact. If this occurs repeatedly, this means the ice cream preparation is ready.

Press the ON/OFF button to turn the appliance off. The light will go off.

Model GVS2

Model GVS2 is equipped with a digital display and supplied with a spatula and flexible lid.

The LCD display indicates that the ice cream preparation is in progress; a beep sounds and it

switches off automatically when the ice cream is ready. Press the ON/OFF switch. The light will

go off. Unplug the appliance.

 Remove the lid, raising the motor unit slightly and turn anti-clockwise. Remove the paddle.

Disassemble the motor unit pressing down on the 2 marks on the sides (Fig. 9).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups GVS241 in the language / languages: All languages as an attachment in your email.

The manual is 1,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Krups GVS241

Krups GVS241 User Manual - English - 14 pages

Krups GVS241 User Manual - Dutch - 9 pages

Krups GVS241 User Manual - French - 14 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups GVS241 Manual

Product: