Manual Krups fnc 156 espresso line (page 20 of 37) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

361700

Zoom out

Zoom in

1/37

• Fill the water tank (1) (2) (3) and start the

appliance (5).

• Move the steam nozzle to the exterior of the

appliance.

• Turn the selector to the setting (19).

Once the appliance reaches the correct

temperature, the orange temperature control

light will go out.

• Immerse the steam nozzle in the container

holding the liquid to be heated.

• Then turn the selector to the setting (20)

until the liquid is hot enough, then reset the

selector to the O setting and remove the

container.

• For liquids other than water, turn the

selector to the setting

(19) for the

following cleaning operation in order to

prevent any blockage of the opening of the

steam nozzle :

• place an empty container below the steam

nozzle.

• select the setting again (20) to remove

the residue of the liquid.

• turn the selector to the setting O.

• Clean the steam nozzle with a damp cloth.

• For more thorough cleaning of the nozzle,

please refer to the paragraph on mainte-

nance.

Maintenance

- Never wash your espresso machine

accessories in the dishwasher.

After use, the water tank must be emptied.

. Drip plate

This must be emptied after using the

appliance after taking off the grid (22) (23). If

several espressos are being prepared one after

the other, the drip plate should be emptied

from time to time (about once every 7 - 8

espressos). The presence of water is normal

and does not signify a leak. If necessary, clean

the drip plate and its grid with water and a

little non-abrasive washing-up liquid, rinse

and dry. When reassembling the machine,

ensure that the plastic lining is in the right

place (24).

. The brewing head, the filter and the

filter holder

These must be cleaned after each use. All you

need to do is wipe a damp cloth over the

brewing head of your appliance and to wash

the other accessories in water and a little non-

abrasive washing-up liquid, rinse and dry.

If the brewing head is heavily clogged up,

unscrew the grid using a coin, clean it and

refit it, pressing down firmly (25).

When your espresso is not being used, do not

leave the filter holder on the appliance to

prevent wear on the gasket.

. The cup warming plate: remove this to

clean it with water and a little non-abrasive

washing-up liquid, rinse and dry (26).

. Steam nozzle: wipe with a damp cloth

after each use

. The cappuccino accessory

For more thorough cleaning the cappuccino

accessory can be dismantled.

• Remove parts A and C from the metal tube

B (27).

• Clean all three parts with hot water. If need

be, unclog the opening of part A using a

fine needle.

• Be careful with the little plastic nozzle (part

A) when you replace the cappuccino accessory.

Descaling

• Descaling of your espresso should be done

fairly frequently with citric or tartaric acid.

• The guarantee does not include

espresso machines which do not

function, or do not function properly,

because descaling has not been carried

out.

However, we would advise you to use the

Krups descaling accessory, reference 054,

which is available from Krups after-sales ser-

vice centres. This accessory includes, apart

from two descaling doses, a testing strip for

FNC1/2/3.PM6.5 19/01/04, 16:1720

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups fnc 156 espresso line in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups fnc 156 espresso line Manual

Product: