Manual Krups fna 143 z2 nespresso concept pelican (page 14 of 36) (English, German, Dutch, French, Italian, Spanish)

362020

Zoom out

Zoom in

1/36

. place a cup beneath the coffee outlet, and

the capsule holder head must be closed and

empty.

. set the function selector (b) to the « »

position.

. once the cup is full, reset the function

selector (b) to the central position.

As soon as the temperature indicator light (e)

becomes fixed (green), you can start to

prepare an espresso or hot water.

. THE HOT WATER FUNCTION

•Fill the tank (a) with fresh water (1) and

position the switch (c) to «I». The

temperature indicator light (e) flashes

(green).

Once the appliance reaches the correct

temperature, the temperature indicator light

(e) becomes fixed (green).

•Place a container under the steam/hot water

nozzle (g).

•Set the function selector (b) to the « »

position : hot water will come out of the

nozzle (g).

•Stop the flow of hot water by returning the

function selector (b) to the central position.

Note :

• Follow this operation to preheat cups before

making an espresso.

Cleaning

•Before doing any cleaning of the appliance,

unplug it.

•Do not wash the accessories of your

appliance in the dishwasher.

• Clean the body of the appliance using a

damp cloth.

• After use, always empty the water tank.

. Drip tray (i) and container for used

capsules (j)

•After every use, the drip tray will fill with

water. This is perfectly normal. The fill

indicator (i1), indicates when to empty the

tray.

•Remove the grille and the fill indicator (i1),

take out the container and empty the drip

tray (6).

• If necessary, clean the drip tray with hot

water and a little non-abrasive washing-up

liquid, rinse and dry. When refitting, put

back the container, the indicator then the

grille.

. The steam / hot water nozzle (g)

Be careful : it may still be burning hot.

• Clean the nozzle after every use using a

damp cloth.

• If the opening in the nozzle outlet is

blocked, clear it using a fine needle.

. Cappuccino accessory (h)

• To completely clean the cappuccino

accessory, separate parts A, B and C (7).

• Rinse the three parts in hot water and dry

them.

• If the small hole in part A is blocked, clean it

using a fine needle.

Descaling

Descale your appliance at regular

intervals !

Descaling your NESPRESSO is essential to

guarantee that your appliance is working at its

best, will last for a long time and produce top

quality coffee.

Depending on how hard the water is in your

region, this descaling should be performed

every two to six months. However, if the

water in your region is very hard or if you use

the appliance a great deal, it would be

advisable to do this more frequently.

The NESPRESSO Club will supply you with a

descaling kit comprising a sachet of descaling

product, a sachet of cleaning product and a

set of instructions for using these products.

You can order this kit in the same way as the

NESPRESSO capsules.

Warning : In no circumstances should you

use vinegar or descalers intended for

other machines.

Use the following method :

The appliance must be plugged in but

switched off (swtich (c) on «0»). It will be

more effective if the appliance is cold.

• Raise the handle (f1) to open the capsule-

holder head (f) (2 ). Take off the capsule

holder (f3) (8a/8b) and lower the handle (f1)

(2).

FNA1.PM6.5 18/02/04, 9:3914

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups fna 143 z2 nespresso concept pelican in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups fna 143 z2 nespresso concept pelican Manual

Product: