English
13
n Do not use accessory attachments that are not recommended by the manufacturer asthis may be
dangerous.
n To protect yourself against an electrical shock do not immerse the cord, plugs, or appliance in water or
other liquids.
n Do not place any sugar coated type of bread in the toaster or anything that may melt or
drop into the toaster, do not toast small pieces of bread or croutons as this may cause
damage to the toaster or a risk a fire.
n Do not try to toast very thick slices of bread that could become stuck in the toasting
slots.
n Do not use this appliance if:
- it has a damaged cord.
- the appliance has been dropped and has visible damage or does not operate properly.
In any of these instances, the appliance must be sent to your local approved aftersales service centre
to avoid any risk of danger. Refer to the guarantee enclosed.
n Do not let the cord hang over the edge of the worktop or come into contact with hot surfaces.
n Do not place on or near a gas burner, electric ring/hob, or near a heated oven.
n Do not cover this appliance while in use.
n Do not put paper towels, cardboard or plastic in, on or under the toaster.
n If flames were to arise from parts of the toaster, never attempt to extinguish them with
water. Unplug the appliance and smother the flames with a damp cloth.
n Do not attempt to dislodge food once the toasting cycle is engaged.
n Do not place your pastries directly on the toaster to warm them up. Use the bread roll
heater (e).
n Do not use this appliance as a source of heating or drying.
n Do not use the toaster for cooking, grilling or defrosting frozen food other than bread products.
n Do not use the appliance to toast bread and warm croissants (or similar products) at th e same time.
n The metal frame can become very hot. Do not touch it! Use an oven glove or tongs.
n Do not use any abrasive cleaning agents (no soda-based scouring products, no scouring pads...), no
metallic utensils, metal scouring pads etc.
n For appliances with a metallic finish: Do not use any cleaning products designed for metals: use a soft
cloth with a window or glass cleaner.
SAVE THESE INSTRUCTIONS
n Use just the right length of flex and store the unnecessary part on the spool in the storage recess
underneath the appliance. Lead the flex out at the side of the appliance and plug in at the mains (1).
n In order to remove any possible remains from the manufacturing operation, the toaster should, before
being used for the first lot of toast, be heated up 1 to 2 times to the highest toasting temperature,
without any bread in the toasting well (ventilate the room).
n Insert the slices of bread (2).
Do not use slices which are too large or too thick, as they must not be allowed to stick in the toasting
well.
n Selecting the degree of toasting (3).
CONNECTING THE APPLIANCE
UPON FIRST USING THE TOASTER
USING THE TOASTER
