Manual Krups f 897 (page 16 of 50) (English, German, Dutch, French, Italian, Spanish)

361267

Zoom out

Zoom in

1/50

We recommend turning the function selector

before the first coffee and after the last

coffee of the day in order to quickly rinse the

system with the capsule holder empty to

prevent coffee particles sticking together (9).

• Remove the capsule holder. Insert the

capsule upside down in the capsule holder

(11). Each capsule contains a single dose of

fresh coffee for a cup of espresso.

• Replace the capsule holder (12).

• Place the preheated cup (see the section on

”pre-heating cups”) under the capsule

holder.

Your appliance is already pre-programmed for

the preparation of espresso (small cup, 50 ml)

or cappuccino (large cup, 120 ml). You can

choose whichever you want by pressing

either the key

or the key

(13).

• Once the espresso is finished, remove the

capsule holder and throw away the used

capsule (14).

After the preparation of espresso, the red

indicator light will flash until the optimum

operating temperature is. However, the

preparation of further espresso is possible at

any time.

• To ensure that your next espresso is prepared

at the optimum temperature, replace the

empty capsule holder to retain its heat.

Individual Programming

To modify the pre-programmed quantities of

coffee, please proceed as follows:

• Switch on the appliance, insert a capsule

into the capsule holder and place a cup

under it.

•As soon as the red operating light stops

flashing, press the memory key

•The

-green control light will lit up as well

as the green indicator light for

and

(15).

• Press and hold down the

key until the

desired quantity of espresso has been

reached (16).

• Now press the

-key to memorise the

quantity (17).

• To programme the quantity for a large cup,

just repeat this procedure using the

key..

Preparation of Hot Water

With this appliance, you can prepare hot

water for liquids

• Fill the water tank and turn the selector for

hot water/steam to the

position.

• Switch on the appliance. As soon as the red

operating indicator light stops flashing,

swing out the steam and hot water nozzle

and place a suitable container under it.

• Press the

key and turn the selector for

hot water/steam to the

position (18). If

you do not activate the selector within 2

minutes, the appliance will return to its

normal operating mode.

• As soon as there is sufficient water in the

container, return the selector to the

position.

• Remove the container and swing the steam/

hot water nozzle inwards over the cup grid

so that any further drops of water can fall

into the drip tray.

Take care! The steam and hot water

nozzle is very hot.

Making steam

Steam makes the milk frothy for a cappuc-

cino, and also preheats cups or any kind of

liquid; the noise you hear during this

operation is caused by the intermittent

running of the water pump.

Please note :

Before making steam, make sure that the

capsule holder on the machine is empty to

prevent the coffee becoming dried out and

blocking the hole in the coffee outlet.

Frothing milk for a cappuccino

You can make the milk frothy in order to whip

up a cappuccino. For best results, use the

ART. 897.PM6.5 18/02/04, 10:1016

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups f 897 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups f 897 Manual

Product: