544433

Krups EA9010 Manual

243
Zoom out
Zoom in
Previous page
1/248
Next page
DEFRNLITEN
43
ENGLISH
Automatic descaling programme of the steam circuit
A message on the screen will indicate when a descaling programme needs to be run for the
appliance. The frequency of this programme depends on the quality of the water used (the harder
the water, the more often the appliance has to be descaled) and on whether a Claris Aqua Filter
System filter is used or not. To run the descaling programme, you will need a recipient with a capacity
of at least 0.6 litres that may be placed underneath the coffee nozzles and the steam nozzle, and a
KRUPS descaling sachet (F 054 – a 40 g sachet is supplied in the Welcome Pack). The automatic
descaling programme has three phases: one descaling cycle and two rinsing cycles. The programme
lasts approximately 22 minutes.
Caution: To respect the guarantee conditions, the cleaning cycle must be carried out when the
appliance requests you not to postpone it further.
!
Caution: You are not obliged to carry out the descaling programme immediately the appliance
requests it, but it must be carried out reasonably soon. Only use KRUPS descaler sachets
supplied in the Welcome Pack; otherwise the guarantee will not cover any material damage
caused by the use of other brands of sachets. Descaler sachets are available from your
KRUPS After-Sales Service Centre.
!
1
When the machine requests descaling, confirm to start the
programme.
Empty the used coffee collector, take out and empty the drip trays.
2
Remove the water tank.
If you use the Krups Claris Aqua Filter System filter cartridge, remove
it before the descaling operation.
Empty the water tank and then fill it with water up to the CALC mark.
Pour the descaler into the water tank and put it back.
Use a large spoon with a long handle to mix the water in the tank or
remove the water tank and carefully shake it from left to right until
the descaler is fully dissolved.
… 243 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA9010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA9010 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info