507870
21
Zoom out
Zoom in
Previous page
1/27
Next page
DE
FRNL
IT
EN
37
ENGLISH
KRUPS SERIE EA9000
36
n Manual cleaning of the steam nozzle
The machine can ask you to clean the nozzle manually or can clean it on your request. Manual cleaning
is requested depending on the number and type of milk recipes prepared.
Below are the main steps in this manual cleaning of the nozzle when requested by the user. Otherwise,
just follow the instructions on the screens displayed by the machine.
Caution: Risk of scalding while unscrewing; the temperature of the nozzle can be high (> 5C).
!
1
n You can access the “Maintenance” menu from the main menu
by pressing the “Maintenance” tab.
n To clean the nozzle and its container, you must follow the sequence
shown in the Maintenance tab.
n Failure to follow this sequence may damage the system.
n Press the “Manual cleaning of the nozzle” button on the touch screen.
n To quit the “Maintenance” menu, press the “Maintenance” tab.
2
n The nozzle comes out of the cleaning container.
n You can clean all of the parts of the machine located behind the coffee
nozzle.
3
n Remove the two drip trays.
n Empty and clean them.
n The nozzle moves forward and slightly downward.
4
n Unscrew the nozzle tip (10) with the steam nozzle (9).
n Do not remove the tip seals, as this may damage them and affect the
frothing performance.
5
n Clean the three holes on the nozzle tip using the pin supplied for this
purpose with the Welcome Pack. You must fully separate the two
parts to clean them properly.
n Do not wash the tip in the dishwasher.
n Caution: clean the tip properly.
n Press the “OK” button.
8.1 Maintenance menu
n Press the Maintenance tab to access the Maintenance menu.
n Automatic cleaning of the steam nozzle
The machine can automatically clean the nozzle on your request, or automatically.
Automatic cleaning is required depending on the number and type of milk recipes prepared.
Below are the main steps in this automatic cleaning when requested by the user. Otherwise, just follow
the instructions on the screens displayed by the machine.
MAINTENANCE AND CLEANING
8
1
n You can access the “Maintenance” menu from the main menu by
pressing the “Maintenance” tab.
n Press the “Automatic cleaning of the nozzle” button on the touch screen.
n NB: The cleaning cycle must not be interrupted.
n To quit the “Maintenance” menu, press the “Maintenance” tab.
n If necessary, the machine will ask you to replace the cleaning liquid
bottle.
2
n Press Start.
(if you do not do so immediately, you will return to the initial screen).
n The machine starts by rinsing the nozzle.
n The nozzle comes out of its cleaning container.
n The cleaning liquid is introduced automatically into the nozzle cleaning
container.
n The machine mixes water with the cleaning liquid.
n Then, the machine cleans the nozzle by soaking it in this mixture.
n The nozzle is then rinsed twice with water.
n The cleaning cycle is finished
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA9000 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Krups EA9000

Krups EA9000 User Manual - German - 111 pages

Krups EA9000 User Manual - Dutch - 50 pages

Krups EA9000 User Manual - French - 111 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info