711470

Krups EA894 EVIDENCE PLUS Manual

38
Zoom out
Zoom in
Previous page
1/421
Next page
When the number of drinks is not enough for descaling to be necessary, the function is not active.
You can also start the descaling program when you want:
- Fill the water tank up to the CALC mark.
- Pour the dose of descaler into the water tank.
- Press the Settings button .
- Select Maintenance.
- Then Descaling.
!
Important: if you unplug your machine during cleaning or in the event of electrical failure, the descaling program
will resume the current step at the time of the incident. It will not be possible to postpone this operation.
Complete the full descaling cycle in order to remove all traces of the descaling product which is harmful
to health.
TROUBLESHOOTING
PROBLEM CORRECTIVE ACTIONS
OPERATION
The machine displays a fault, the
software is frozen.
OR
Your machine has a malfunction.
Turn off and unplug the machine, remove the lter cartridge,
wait a minute and restart the machine.
Press and hold the on/off button for at least 3 seconds for
starting.
The appliance does not turn on after
pressing the On/Off button (for at least
3 seconds).
Check the fuses and the power socket of your electrical
installation.
Check that the two power plugs are correctly inserted into
the socket.
The appliance must be disconnected
and reconnected.
Unplug the appliance for 20 seconds, remove the Claris
Aqua Filter System cartridge if necessary, then put it back
into service.
A power failure has occurred during a
cycle.
The appliance resets automatically when it turns back on.
USE
The grinder makes an abnormal noise. Foreign bodies are surely present in the grinder.
There is water under the appliance.
Before removing the water tank, wait 15 seconds after the ow
of coffee so that the machine nishes its cycle correctly.
Verify that the drip tray is well positioned on the machine. It
must always be in place even when the machine is not in use.
Verify that the drip tray is not full.
When switching off, hot water ows
through the coffee outputs and the One
Touch Cappuccino block.
Depending on the type of preparation the machine can
perform automatic rinsing during its powering off.
The cycle lasts only a few seconds and stops automatically.
The adjustment button for the grinding
neness is difcult to turn.
Turn the adjustment button of the grinding neness only
when the grinder is operating.
The appliance has not issued any
coffee.
An incident has been detected during its making.
The appliance is reset automatically and is ready for a new
cycle.
You have used ground coffee instead of
coffee beans.
Use your vacuum cleaner to collect the ground coffee
contained in the bean container.
36
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA894 EVIDENCE PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA894 EVIDENCE PLUS in the language / languages: All languages as an attachment in your email.

The manual is 4,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info