565311
16
Zoom out
Zoom in
Previous page
1/28
Next page
41
EN
Preparing other drinks: milk-based recipes
These recipes are made using the steam spout; before each preparation check that it is
tight by turning the bottom to the right.
The steam froths the milk. As steam production requires high temperatures, the appliance
has an additional preheating phase.
When the screen displays the drink selection menu, press the “steam” button.
The screen indicates that the appliance is preheating and a message appears asking you
to place a container under the steam spout. You can start the steam production by pressing
the “OK” button.
MILK FROTH
Important: we recommend that you use pasteurised or UHT milk, recently opened.
Unpasteurised milk does not produce the best results. After using the steam
functions, the spout can remain hot; we recommend that you wait a few
moments before handling.
Check that the steam spout is properly positioned. Fig. 11.
Pour milk into your milk container. Only fill half way. Immerse the steam spout into the milk.
Fig. 12.
Press the steam button and follow the on-screen instructions.
To achieve a good result:
Stage 1: While holding the milk container, immerse the steam spout into the milk (about 2
cm) and wait for it to start frothing.
Stage 2: Raise the container slightly (about 1 cm). Never immerse the metal tube
completely.
Stage 3: Lower the container gradually as the foam increases.
Caution: do not immerse the metal tube completely.
Important: press any button to stop the steam function. The maximum duration for steam
production per cycle is limited to 2 minutes. Caution, the cycle does not stop
immediately.
When the spout is hot, handle using the plastic part only. Fig. 13.
Caution: avoid all contact with the metal parts on the spout during use, you risk burning
yourself. Handle the spout using the plastic accessory provided in your Welcome
pack.
To remove any trace of milk from the steam spout, place a container under the spout and
press "hot water" for a few seconds.
The steam spout can be disassembled for thorough cleaning. Fig. 14.
Wash with water and a bit of non-abrasive washing up liquid using a brush. Rinse and dry.
Fig. 15.
Before putting back into its place, make sure that the air holes are not blocked with milk
residue. Unblock with the needle provided if necessary. Fig. 16.
!
!
!
!
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA8400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA8400 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Krups EA8400

Krups EA8400 User Manual - German - 242 pages

Krups EA8400 User Manual - Dutch - 27 pages

Krups EA8400 User Manual - French - 28 pages

Krups EA8400 User Manual - All languages - 242 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info