Manual Krups EA82FD - QUATTRO FORCE (page 26 of 184) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

672694

Zoom out

Zoom in

1/184

Place a cup under the coffee outlet. You can lower or raise the coffee outlet to suit the size of your cup (15).

Select your drink and conrm by pressing quickly twice on the conrmation button.

A message will indicate that you have requested two cups.

The appliance will automatically run two complete coffee preparation cycles.

Double cup function (using the double espresso accessory

(1)

)

Your appliance enables you to prepare two cups of coffee or espresso for the following three preparations: espresso/strong

espresso/coffee. This function is not available for long coffee drinks.

Make sure you don’t take 2 cups after the rst cycle.

You have prepared your appliance. The drinks selection menu has appeared.

Place the double cup accessory under the coffee outlet.

Place 2 cups under the accessory’s coffee outlets. You can lower or raise the coffee nozzle with the accessory to suit the size

of your cup.

Select your drink and conrm by quickly pressing twice on the OK button.

A message will indicate that you have requested 2 cups.

PREPARING HOT WATER

Install the steam nozzle on the machine. Select the hot water recipe from the drinks selection menu. A message invites you to

place a container beneath the steam nozzle. You can start hot water production by pressing the conrmation button.

To interrupt the hot water function, simply press any button.

If the nozzle is obstructed, unblock it with the needle provided.

The maximum quantity of water per cycle is limited to 300 ml.

PREPARING A CAPPUCCINO

We recommend that you use very fresh, very cold pasteurised or UHT milk, recently opened. Unpasteurised milk does

not produce the best results.

Preparing and installing a milk jug

The milk jug is composed of a plastic container, a lid (including a cassette) and a exible pipe connecting it to the machine's drinks

outlet. Before the rst use, carefully clean the different elements.

Pour milk into the jug (at least 150 ml) (16). Put the lid on the jug by screwing it down with light pressure (17). Lift the locking lever

(18). Install the milk jug on the machine by connecting it to the steam outlet (19), then lowering the locking lever (20). Insert the

exible pipe into the intended opening in the cassette (21) then place the other end beneath the magnetic drink outlet (22). Ensure

that the system's lid button is in the cappuccino position (23).

Making a cappuccino

While the screen is displaying the drinks selection menu, give a short press (< 3 seconds) on the machine's cappuccino button

(24). A pre-heating phase takes place, then the milk is frothed, and nally the espresso is poured. Your drink is ready (25).

you can interrupt the cycle by pressing OK.

nb the cycle does not stop immediately.

A message appears on the screen telling you to clean the system. We recommend you to carry this out, referring to the

paragraphs CAPPUCCINO SYSTEM RINSING and/or MANUAL MAINTENANCE OF THE CAPPUCCINO SYSTEM.

CAPPUCCINO SETTINGS

The machine enables you to set the quantities of milk and coffee according to your desires for a perfectly personalised

cappuccino.

You can alter these settings via the Cappuccino Settings menu.

While the screen is displaying the drinks selection menu, give a long press (> 3 seconds) on the machine's cappuccino button.

1. Select Standard for the factory settings

2. Select New to personalise your recipe. The following stages take place:

a. Pre-heating of the machine

b. Milk frothing phase: press OK when the volume of milk required is reached.

c. Coffee phase: press OK when the volume of coffee required is reached.

The machine will indicate that the new volumes have been recorded for the next cappuccinos.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA82FD - QUATTRO FORCE in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups EA82FD - QUATTRO FORCE Manual

Product: