690029
29
Zoom out
Zoom in
Previous page
1/187
Next page
24
You can stop your appliance at all times: the appliance will emit two beeps and then it will
stop soon afterwards.
PROBLEMS AND CORRECTIVE ACTIONS
PROBLEMS CORRECTIVE ACTIONS
The appliance does not
switch on when the “On/Off”
is pressed.
Check that the plug of the power cord is pushed
correctly into the mains socket.
Water or steam comes
incorrectly out of the steam
nozzle.
In case of repeated operation, several drops may drip
from the steam nozzle.
The espresso or coffee is not
hot enough.
Change the coffee temperature setting.
Heat the cups by rinsing them with hot water.
The coffee is too light or not
strong enough.
Check that the coffee bean tank has coffee in it and that
it is owing correctly. Avoid using oily, caramelised or
avoured coffee.
Reduce the volume of coffee using the central knob.
Turn the grinding neness knob towards the left for
a ner grind. Prepare in two cycles using the 2 cup
function.
The coffee ows too slowly.
Turn the grinding neness knob towards the right for a
coarser grind (may depend on the type of coffee used).
Carry out one or two rinsing cycles.
The coffee is not creamy
enough.
Turn the grinding neness knob towards the left for a
ner grind (may depend on the type of coffee used).
Change the Claris Aqua Filter System cartridge (follow
the installation procedure on page 13).
Carry out one or two rinsing cycles.
The appliance does not serve
any coffee.
An incident has been detected during the preparation.
The appliance resets itself automatically and is then
ready for a new cycle.
Why can I not run descaling/
why does my machine not
request a descaling cycle?
The machine only requests a descaling cycle once it has
made a certain number of drinks using steam.
You have used ground coffee
instead of bean coffee.
Use your vacuum cleaner to suck out the pre-ground
coffee in the coffee bean tank.
The grinder makes a strange
noise.
There are foreign particles in the grinder. Contact
KRUPS’ Customer Service.
The grinding neness knob is
hard to turn.
Only change the grinder setting when it is operating.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA82 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA82 serie in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info