590644
14
Zoom out
Zoom in
Previous page
1/43
Next page
2322
Buttons and knobs
“On-off” button
Navigation button (cursor key)
Favourite coffee type button or press
Save favourite button
or press and hold
To adjust selected settings
Steam drink button
Start or stop equipment
Maintenance and settings button
To adjust how finely ground you would
like the coffee beans.
Symbols
Constant
Flashing
Meaning
!
The coffee JURXQGV collector or the coffee drawer is missing or incorrectly
positioned
!
Empty the coffee JURXQGV collector + clean the drawer + empty the drip tray
!
Refill the water tank
The water tank is not properly in place
!
Place a container (0.6 L minimum) under the steam and coffee jets
!
Maintenance cycle in progress
!
Malfunction: unplug the machine for ten seconds then plug it back in
!
Install filter cartridge
!
Rinsing cycle in progress
!
!
Clean machine with KRUPS cleaning tablet
!
Cleaning cycle interrupted
!
!
Descale machine with KRUPS descaling sachet
!
Descaling cycle interrupted
!
Adjust the water hardness
!
Enable automatic rinsing of the coffee circuit when the machine starts.
!
Program the length of time after which your machine switches off
automatically (standby)
!
!
Adjust the coffee temperature/Pre-heating indicator
!
Favourite A or B - 2 drinks can be saved in memory
!
Registering favourite A or B
!
!
Preparation progress indicator
!
Press the START-STOP button
!
Coffee strength indicator
Volume or time indicator
!
Number of cups (1 or 2)
Active use indicator
Maintenance or settings selection
TABLE OF MEANINGS OF KEYS AND BUTTONS APPLIANCE DESCRIPTION
BEVERAGE PREPARATION
BEVERAGE PREPARATION
TYPES OF COFFEE
Number of
possible cups
Possible settings
Volume (ml)
Possible settings
Strength
RISTRETTO
1 20 to 30 ml (per 10 ml)
1 to 3 beans
2 x 1
2 x 20 to 30 ml (per 10 ml)
In two cycles
ESPRESSO
1 30 to 70 ml (per 10 ml)
1 to 3 beans
2 x 1
2 x 30 to 70 ml (per 10 ml)
In two cycles
COFFEE
1 80 to 180 ml (per 10 ml)
1 to 3 beans
2 x 1
2 x 80 to 180 ml (per 10 ml)
In two cycles
A Water tank lid
B Water tank
C Coffee drawer
D Used grounds collector
E Coffee outlet and height-adjustable handle
F Grid and removable drip tray
G Coffee bean container lid
Coffee bean container
H Coffee grounds fineness adjustment knob
I Metal grinder
J Cleaning tablet funnel
K Cup grid
L Water level float
Graphic screen
M On/off button
N Coffee and favourites button
O Steam button
P Settings button
Q Navigation button
R + or - button
S Start/stop button
T Steam nozzle
1
2
Appliance preparation
To prevent used water spillage from making your work surface dirty and to avoid burning yourself, don’t
forget to attach the drip tray.
Remove and refill the water tank (1-2).
Refill the coffee bean container (3).
First use
Turn on the appliance by plugging it in then pressing the on/off button (4).
The machine pre-heats. At the end of the cycle, the symbols and start button start to flash.
Rinsing circuits
Put a 0.6L container underneath the two coffee and steam nozzles.
Press the start/stop button (5) . The machine starts and rinses the hydraulic circuits (coffee and steam)
for around 2 minutes. At the end of the initialisation cycle, the coffee types menu appears. (6)
You are advised to rinse the circuit if you have not used your machine for several days (see the chapter on
Maintaining Your Appliance).
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA8160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA8160 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Krups EA8160

Krups EA8160 User Manual - English, German, Dutch, French, Italian, Portuguese, Spanish - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info