561499

Krups EA69xx Manual

13
Zoom out
Zoom in
Previous page
1/120
Next page
ENDE
FR
NLESPTITELDANOSVFI
11
ENGLISH
Press the key to start
the automatic cleaning
program when the
“Cleaning needed”
message is displayed.
Just follow the instruc-
tions shown on the
screen.
7.2 Rinsing out the circuits: see page 6
7.3 Machine cleaning program – total duration: about 20 minutes
You should perform the cleaning program about every 350 preparations of espresso or coffee.
The appliance will let you know when you need to proceed with cleaning through the ‘clean’ light
coming on.
The quantity of scale deposited depends on the hardness of the water used. The appliance will
automatically war
n you with a message when you need to pr
oceed with scale removal.
7.4 Automatic scale removal program – total duration: about 22 minutes
To perform the cleaning program, you will need a container with minimum capacity of 0.6 litres
and a KRUPS (XS 3000) cleaning tablet.
Caution! To benefit from the guarantee conditions, it is essential to perform the appliance
cleaning cycle when informed to do so. Be sure to follow the order of operations.
You can continue to use the appliance, but you are advised to perform the program as soon
as possible.
!
Caution! Only use KRUPS (XS3000) cleaning tablets. We cannot be held responsible for any damage
that may result from the use of tablets from other brands.
You can obtain cleaning tablets from KRUPS Service Centres.
!
Caution! Make certain to protect your work surface during cleaning cycles, especially if they are
made of marble, stone or wood.
!
Caution! If your product is equipped with our Claris - Aqua Filter System cartridge F088 -
Please remove this cartridge during the descaling operation.
!
Note:
The automatic cleaning
program is in three parts –
the cleaning cycle itself, then
2 rinsing cycles. This program
lasts about 20 minutes.
Press to perform cleaning at
any time and then choose
MAINTENANCE => OK
=> CLEANING
from the menus displayed.
!
Note:
If your machine is unplugged when cleaning or if there is a power cut, the cleaning programme will
restart at the step in progress when the incident occurred. You will not be able to postpone this operation.
This is essential due to water system rinsing reasons. In this case, a new cleaning tablet may be required.
Be sure to complete the entire cleaning cycle to avoid any risk of irritation (seek medical advice if cleaning
solutions are accidently swallowed). The cleaning cycle is a continuous cycle and the pump can be heard
intermittently. Do not put your hands under the coffee outlets during the cycle.
!
IFU_KR_COFFEEMAKER_EA69xx_0828344_EN 17/06/10 16:52 Page11
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA69xx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA69xx in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info