Manual Krups EA6930 (page 9 of 120) (English, German, Dutch, French, Portuguese, Spanish)

561501

Zoom out

Zoom in

1/120

ENDE

NLESPTITELDANOSVFI

ENGLISH

Caution! When rinsing process is in progress, hot water comes out through the nozzles. Take care

not to be scalded.

Caution! Change the setting during grinding.

Never force the grinding fineness setting button.

3.3 Preparing the grinder

 Adjust the fineness of your coffee grinding to set the strength of your coffee. The finer the grind

setting, the stronger and creamier the coffee will be.

 Turn the “Grinding fineness setting” button to set the degree of grinding fineness.

Turn anticlock-

wise for a finer

grind.

Turn clockwise

for a coarser

grind.

You can change the vo-

lume of water at any time

using the rotating button.

Use the rotating

button to select your drink

and confirm by pressing

the OK key.

The drink selection menu

will be displayed.

Put a cup under the

coffee outlets.

You can lower or raise the

coffee outlets to suit the

size of your cups.





PREPARING ESPRESSO AND ORDINARY COFFEE

4.1 Preparing an espresso

 The quantity of water for an espresso must be between 20 and 70 ml.

Each time you plug your machine in, it will carry out an initialisation cycle.

Press the button, wait for the end of pre-heating and perform a rinsing operation if you wish.

Caution! Your appliance is designed to make coffee from coffee beans only.

When you first make coffee with the machine or after a long period of absence or a clea-

ning or scale removal procedure, a little steam and hot water will come out of the steam

nozzle (priming). Splashing or scalding may occur if the coffee outlets are set too high in

relation to the size of the cups.







Note: To stop coffee flowing into the cup, you can either again press a key or turn the rotating button to reduce

volume.

IFU_KR_COFFEEMAKER_EA69xx_0828344_EN 17/06/10 16:51 Page7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA6930 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups EA6930 Manual

Product: